Drivers window won't do up need some heilp
#1
Junior Member
Thread Starter
Join Date: Dec 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
ML 430
Drivers window won't do up need some heilp
Wouln't you now it the worst storm in 20 years in MN and I go to BK and put
the window down to order and have to drive home with window down. Ok I
had it half way down and it wouldn't do up. It still went down I believe it
is a switch problem. Is there a way to get it up? If so how do you get the
switches out of the console. Asking so I don't break anything. If it is a switch where is a good place to order a new one. If it's not the switch how
do get the door panel off to check the motor. Thanks
Nic
the window down to order and have to drive home with window down. Ok I
had it half way down and it wouldn't do up. It still went down I believe it
is a switch problem. Is there a way to get it up? If so how do you get the
switches out of the console. Asking so I don't break anything. If it is a switch where is a good place to order a new one. If it's not the switch how
do get the door panel off to check the motor. Thanks
Nic
#2
Junior Member
Thread Starter
Join Date: Dec 2009
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
ML 430
Well I found the problem the switch. I also found this very helpful
how to. Takes about 15 min's just follow the instructions.
I can't believe no one offered any assistance.
http://www.nicedeals.co.uk/blog/diy-...h-replacement/
how to. Takes about 15 min's just follow the instructions.
I can't believe no one offered any assistance.
http://www.nicedeals.co.uk/blog/diy-...h-replacement/
#3
Junior Member
Join Date: Jul 2009
Location: Outside of Beantown
Posts: 53
Likes: 0
Received 1 Like
on
1 Post
1998 ML 320 1975 450 SL
I just saw your posting so this info is just a little to late.
When I had this problem I took the switch out, gave it a good shot of WD-40, put it back in and it worked for a couple of days till my replacement switch came in. Worked for me..... Twice!
Boston Mark
When I had this problem I took the switch out, gave it a good shot of WD-40, put it back in and it worked for a couple of days till my replacement switch came in. Worked for me..... Twice!
Boston Mark