ML270 inlet manifold leaking help needed
09-07-2010, 09:37 AM
#1
Newbie
Thread Starter
Join Date: Sep 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ML270 2002
ML270 inlet manifold leaking help needed
Hi guys I recently been sold a ML270 and have found oil leaking from the inlet manifold swirl flaps.
Could someone tell me the cause for this and also is there a cure other than changing the manifold itself.
Thanks Mal.
Could someone tell me the cause for this and also is there a cure other than changing the manifold itself.
Thanks Mal.
09-07-2010, 11:34 AM
#2
Newbie
Join Date: Jun 2009
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
ml270
Yes i can help you.
1-First i have done
ou disconnect engine breather pipe block the opening wth cork from turbo pipe. stick a hose to breather outlet and leave it hanging down
2-i have removed all swirl flaps from the manifold (dont disconnect servo cable) and block the holls with bolt and nut with rubber washers
Now everthing okey no oil no turbo boot escape.
1-First i have done
ou disconnect engine breather pipe block the opening wth cork from turbo pipe. stick a hose to breather outlet and leave it hanging down 2-i have removed all swirl flaps from the manifold (dont disconnect servo cable) and block the holls with bolt and nut with rubber washers
Now everthing okey no oil no turbo boot escape.
