Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I get a lot of requests for pictures of interiors, so here was a BMW E90 335 sedan that I wrapped over the factory wood interior with the 3M dinoc matte carbon fiber vinyl finish. I don’t typically get a chance to take pictures of the installed/finish product in the car, because most people’s interiors that I do are non-local and they just ship me their interior pieces for me to wrap.
However, the owner of this car was local to me in Anaheim Hills/Orange County and came by to have me remove his interior trim pieces and also wrap them. Overall the results turned out fantastic and the owner of this car was extremely happy with the results. The cool thing about the dinoc finish is that it has a good feel and texture to it as well, so it doesn’t make the wrapped pieces feel cheap or weird in any way.
Before:
After:
-Don Nguyen
donathon@gmail.com
However, the owner of this car was local to me in Anaheim Hills/Orange County and came by to have me remove his interior trim pieces and also wrap them. Overall the results turned out fantastic and the owner of this car was extremely happy with the results. The cool thing about the dinoc finish is that it has a good feel and texture to it as well, so it doesn’t make the wrapped pieces feel cheap or weird in any way.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I’ve worked on several cars for the owner of this white Audi RS7 sedan in the past. This time he came by to have me vinyl wrap the roof of his RS7 with my gloss black vinyl material to give it the panoramic look. In addition to wrapping the main section/portion of the roof, I also wrapped the smaller rear top hatch part that sits right behind the main section of the roof. This gave it a smooth transition from the roof to the rear glass. The owner of this car came to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Typically people have their roofs wrapped, but the owner of this white Honda CRZ had me vinyl wrap the hood of her car, using the 3M dinoc matte carbon fiber material. Due to the design of the material, and even carbon fiber weave in general, the material looks different from different angles as you walk around the car. The owner of this car came out from Riverside to my shop in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white Audi Q5 brought me her car to have me lightly smoke/tint her tail lights with my film. I’ve had a lot of people ask me recently if I have any other shades, but this is actually the only shade I have used and posted pictures of for the past couple of years now. In addition to her tails, I also did the lower bumper reflectors to match the tail lights, but left the upper third brake light alone. She brought her car to me in Anaheim Hills/Orange County to have the tinting work done.
Before:
Driver/left side tinted - passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side tinted - passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this black Lexus GS350 sedan, I vinyl wrapped the chrome/brushed aluminum trim around his windows, rear chrome trunk bar and front chrome grill surround in my gloss black vinyl material. We went with gloss black over matte black to have the trim pieces blend in with the rest of the black paint better. The owner of this car was from Orange County as well and drove out to me in Anaheim Hills to get the work. Getting rid of all of the chrome really cleans up the lines of the car quite a bit.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
On this white Mercedes Benz E350 sedan, I vinyl wrapped the roof of the car with my gloss black vinyl and also blacked out the chrome/brushed aluminum window trim with the same gloss black finish. I had some requests to post pictures of cars with roof spoilers that were left white, so here’s an example of a car that had the roof vinyl wrapped gloss black but left the roof spoiler body colored. In addition the the chrome around the window trim, I also blacked out the rear trunk chrome bar. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Most of the pictures of interiors that I’ve wrapped and posted in the past were of the 3M dinoc matte carbon fiber finish. However, the owner of this BMW E46 3 series had me vinyl wrap the interior on his car in the 3M 1080 gloss carbon fiber finish. The 1080 gloss carbon is more black versus the dinoc matte carbon which is more of a grayish finish. The owner of this car drove out to me in Anaheim Hills/Orange county to have the work done. I thought the way this finish turned out on the interior went well with the car.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this blue E92 M3 has had me do several of his cars in the past before as well. This time he brought me his car to have me lightly smoke/tint the tail lights on his car. Sorry for the before/during pictures, the lighting wasn’t as good, but hopefully you can see how the tail lights look like in the after pictures. The owner of this car was around Newport Beach are and came out to me in Anaheim Hills/Orange county to have the tint work done. It’s a fairly light shade, which gives it a very factory look.
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side stock - passenger/right side tinted:
After:
-Don Nguyen
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I did quite a bit of work on this white Mercedes Benz C class C250 coupe. The owner of the car had me black out the chrome/brushed aluminum window trim with my gloss black vinyl material. In addition the window trim, I also lightly tinted/smoked the tail lights and blacked out the center lower portion of the front bumper in gloss black as well. Even though the car was still relatively stock, these small subtle changes still changed the look of the car quite a bit, without making it look overly modified. It’s as if it could have come from the factory this way. I believe the owner of this car was from Riverside and drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
Driver/left side tinted/smoked - Passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
Driver/left side tinted/smoked - Passenger side stock:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this black BMW 3 series E92 coupe had me black out the chrome/brushed aluminum on his window trim in my matte black vinyl. We went with matte black over gloss black on his car to give it some contrast. Blacking out the chrome makes a big difference, especially on a black car that doesn’t have any other chrome accents on it. If anything, the only other thing I would have blacked out as well would have been the amber reflectors in the front bumper. The owner of this car drove out from Los Angeles to me in Anaheim Hills/Orange County to have the vinyl wrap work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this alpine white BMW E92 M3 sedan came by to have me vinyl wrap the roof of his car in my gloss black vinyl material. The black roof really completely changes the look of the car, as you can see in the before/after pictures. The vinyl gets tucked in every where along the roof, rails, and antenna, during the installation. This makes sure that the roof holds longer over time and to the elements. The owner of this car was also in Orange County and drove out to me in Anaheim Hills to get the vinyl wrap work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I’ve had requests from people to post some more pictures of interiors that I’ve done. This is on a BMW F10 5 series sedan that originally had brushed aluminum/silver trim accents in the car. The interior trim on this car is different than most other cars, since the interior trim pieces have an edging around the trim pieces, which you can see that I left unwrapped in the pictures. Also, most interiors I’ve done in the past were with the 3M dinoc matte carbon fiber material, however, the owner of this car wanted me a finish that was slightly glossier and blacker, so we went with with the 3M 1080 gloss carbon fiber finish. In addition to his interior trim, I also did his rear bumper diffuser piece in the same material. The owner of this car was from Pomona and drove out to me in Anaheim Hills, Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Typically people have me lightly tint/smoke their tail lights with my film, but the owner of this white Audi A4 sedan had me light smoke/tint his head lights instead. The tint is actually fairly light, so it doesn’t affect the light output from the head lights onto the road by any significant amount. I’ve done this for several cars in the past, and most owners have reported to me that the light output was fairly the same or any light output difference was fairly insignificant from their perspective in the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. In addition, having the film on the headlights will protect it from rock chips and also fading/hazing that typically happens to head lights over time.
Before:
Passenger left side - stock :: Driver/right side - Tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Before:
Passenger left side - stock :: Driver/right side - Tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this Silver Lexus IS350 sedan was actually from norcal and came out to me in Anaheim Hills, Orange County to have me vinyl wrap the roof of his car in my gloss black vinyl material. After I had wrapped the roof, he had me do the rear trunk spoiler as well, so that’s why in the first set of pictures the trunk spoiler is still body colored and not wrapped yet. I think the black trunk spoiler went well with the gloss black roof and complimented it fairly nicely.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For those who are keep track, I may be making my last norcal trip for the year either the first or second week of September. I haven’t finalized it, but once I do, I’ll make an official thread for it. However, those who e-mail me ahead of time will get priority registration for setting up appointment times with me.
The owner of this brand new white Mercedes Benz E250 sedan had me wrap his roof in my gloss black vinyl material and also black out the chrome/brushed aluminum window trim in the same finish to match. I would have also done the rear trunk bar chrome piece to match, but the owner of this car wanted to leave it I believe. The black roof and blacked out window trim sets it off from the other E classes on the road, but without making it look too modified. It’s a very factory look, in my opinion.
Before:
After:
-Don Nguyen
donathon@gmail.com
The owner of this brand new white Mercedes Benz E250 sedan had me wrap his roof in my gloss black vinyl material and also black out the chrome/brushed aluminum window trim in the same finish to match. I would have also done the rear trunk bar chrome piece to match, but the owner of this car wanted to leave it I believe. The black roof and blacked out window trim sets it off from the other E classes on the road, but without making it look too modified. It’s a very factory look, in my opinion.
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is one of the cars that I did during one of my trips up to norcal/bay area to do wraps up there. The owner of this black Mercedes Benz E63 brought his car by to me to have me black out his chrome window trim with my gloss black vinyl material as well as lightly tint / smoke his head lights and tail lights. Took some up close pictures of the edges of the trim and lights to show the coverage and details for those who have asked or were interested in seeing more detailed pictures of my work. The tint / smoke film material that I use is fairly light, as to minimize the amount of light output that is reduced/decreased. It's also light enough where you should not get any hassle/issues from cops for them, as they almost resemble how a lot of factory tinted / smoked tail lights look now a days.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I thought the car looked awesome before, and the black roof really sets it off just ties in with the car very nicely. The owner of this Mars Red Mercedes Benz C63 had me vinyl wrap the roof of his car my gloss black finish vinyl material. The owner of this car was from San Diego. I know most of the cars that I do are white cars, but this just goes to show that the black roof looks good on other colored cars as well. The only other thing I would have done to this car would have been to black out the chrome/brushed aluminum window trim.
Had some people ask for some indoor shots and outdoor shots for comparison, so here they are.
-Don Nguyen
donathon@gmail.com
Had some people ask for some indoor shots and outdoor shots for comparison, so here they are.
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white Mercedes C350 sedan had me vinyl wrap the roof of his car in my gloss black vinyl material. We went with the gloss black to give the car a panoramic look, which flowed well with the glass sunroof of the car. The owner of this car was from Tustin/Irvine area and came out to me in Anaheim Hills/Orange County to have the work done.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Some requests for these pictures, so I figure I'll post them up here. This is one of the cars that I did while I was up in the bay area (san jose) / norcal area last time. I tinted / smoked the tail lights on this new Mercedes Benz E63 AMG. In addition to the tail lights, I also blacked out the chrome / brushed aluminum window trim on his car with my matte black vinyl material. Everything worked and tied in together pretty nicely with the rest of the theme of his car:
Before:
Left/driver side stock - Right/passenger side tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Before:
Left/driver side stock - Right/passenger side tinted/smoked
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is one of the cars that I did some vinyl work on when I was up in norcal / Bay Area for vinyl wrapping. The owner of this car had me black out the chrome / aluminum window trim on his black E65 wagon. In addition to that, I also tinted his tail lights with my smoke film. Instead of tinting the entire tail light, I cut out the clear portion of the tail lights so that only the red is tinted / smoked. At first I wasn't sure how it'd look, but the contrast it ends up creating is pretty nice and I must say I like it. We also went with the matte black over the gloss black for the window trim, to provide some contrast to the gloss black paint and allow the trim pieces to still accent the car.
Before:
Driver (left) side stock - Passenger (right) side tinted / smoked before clear portion was trimmed out:
After:
Tinted / smoked tail lights WITH clear portion trimmed out now:
-Don Nguyen
donathon@gmail.com
Before:
Driver (left) side stock - Passenger (right) side tinted / smoked before clear portion was trimmed out:
After:
Tinted / smoked tail lights WITH clear portion trimmed out now:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is one of the few new BMW F30 silver 328i sedan that I have wrapped with the 3M Di-noc matte carbon fiber finish recently. As you can see, the finish/look of the cf vinyl roof changes depending on the angle that you are looking at it and how the light reflects off of it. The matte carbon roof complimented the darker colored wheels that were on the car fairly well. The pictures don't do it much justice, since I was mainly focusing on capturing an accurate portrayal of the roof vs the finish of the wheels. The owner of this car drove out to me in Anaheim Hills/Orange County to have his roof wrapped.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I really believe that blacking out the chrome/brushed aluminum on bigger bodied cars, such as this black Mercedes Benz S550 makes a huge difference and changes the look of the car completely. For this S550, I blacked out the chrome around the windows, the lower chrome bars on the bottom of the doors and the rear back chrome trunk bar piece with my gloss black vinyl material. I believe the owner of this car was from either Los Angeles or San Diego and drove out to me in Orange county/Anaheim Hills to have the work done. We went with the gloss black finish to match the finish on his already gloss black powder coated wheels.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this white Mercedes Benz GL550, I blacked out the chrome/brushed aluminum window trim in my matte black vinyl material. In addition to the window trim pieces, I also did the chrome on the grill area, lightly smoke/tint the head lights, blacked out the chrome on the top of the door handles, and blacked out the chrome on the door moulding pieces. The owner of this car was from Newport Beach and came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
Before:
-Don Nguyen
donathon@gmail.com
Before:
Before:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this silver Mercedes E63 AMG sedan, I blacked out the chrome/brushed aluminum window trim with my gloss black vinyl material to give it a factory OEM look. I think the gloss black went well with the silver color of the car. Something small and minor such as blacking out the chrome window trim can change the look of the car completely. The owner of this car came out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I did quite a bit of work on this black Mercedes Benz C250 sedan. I blacked out the chrome/brushed aluminum window trim, the lower door pieces, rear trunk bar and the front day time running light chrome pieces. In addition to those, I also lightly tinted the head lights and tail lights. I took some pictures with one side tinted and one side stock, to show the differences between stock versus tinted with my film. It’s a fairly light film, which gives it a OEM+ look. The owner of this car was from Inland Empire I believe and came out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
Driver/right tinted - Passenger/left side stock:
Driver/left side tinted - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
Driver/right tinted - Passenger/left side stock:
Driver/left side tinted - Passenger/right side stock:
After:
-Don Nguyen
donathon@gmail.com
