2001 ML320 daylight DIY
Thread Starter
Newbie
Joined: May 2013
Posts: 5
Likes: 0
From: Hong Kong
ML320
2001 ML320 daylight DIY
I have a 2001 ML320 but no fog light installed. I want to install two daylight at the bumper but don't know where to get the 12V power for the two lights. Since they are daylights, I would like to have them on when the engine started.
Thanks in advance.
Joseph
Thanks in advance.
Joseph
Thread Starter
Newbie
Joined: May 2013
Posts: 5
Likes: 0
From: Hong Kong
ML320
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 765
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Many have tried to drill holes and it looks terrible every time, but you can do what you like.
Take both covers off the fuse box and attach ground wires and power wires to the appropriate terminals in the photo. You will need to supply a nut for the center stud. Also install an in-line fuse holder with a 7.5 amp fuse for each power feed to Cir. 15 stud.
Take both covers off the fuse box and attach ground wires and power wires to the appropriate terminals in the photo. You will need to supply a nut for the center stud. Also install an in-line fuse holder with a 7.5 amp fuse for each power feed to Cir. 15 stud.
Thread Starter
Newbie
Joined: May 2013
Posts: 5
Likes: 0
From: Hong Kong
ML320
Sorry, due to busy in my job, I have no time to follow your suggestion.
I am free now and will continue this task but want to clarify if I can connect the grounding to the grounding point located at the back of main headlight?
Joseph
I am free now and will continue this task but want to clarify if I can connect the grounding to the grounding point located at the back of main headlight?
Joseph
