ML320 stuck in limp mode or low range
#1
Newbie
Thread Starter
Join Date: Jan 2013
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
mercedes ml320
ML320 stuck in limp mode or low range
Hi ALL, I need help. I have a Mercedes ML320 petrol year 2000 (X). I think it is either stuck in limp mode or in low range. Basically it won't shift from first gear, I will explain everything from the point of turning on the ignition key. So when I, turn the jeep ignition on a alarm sounds and the low range light flashes for about 5-8 seconds then it stops and light goes out, I have gone through the reset thing and I can't get the light to stay on, ABS, EBS warning lights and another 2 warning lights also stay on. Could it be the low range switch itself had gone ??
To date I have done the following to try and resolve to problem;
Changed various sensors,
Changed the shift control transfer motor,
Changed the shift transfer module,
Fully serviced the gearbox,
Fitted new battery,
The problem still remains
To date I have done the following to try and resolve to problem;
Changed various sensors,
Changed the shift control transfer motor,
Changed the shift transfer module,
Fully serviced the gearbox,
Fitted new battery,
The problem still remains