OBDII Cat and Evap not ready
04-20-2021, 03:52 PM
#1
Newbie
Thread Starter
Join Date: Apr 2020
Location: Texas
Posts: 5
Received 0 Likes
on
0 Posts
2007 r350 2004 ml500
OBDII Cat and Evap not ready
Hello,
So I have been doing some work on my 04 ml500 and it has not had an inspection in almost 2 years. I have driven it it some highway and city, but still have no readiness on the cat and evap. I have looked at some of the available readiness drive cycles, but they are not realistically obtainable in my area, especially needing to be done from a cold start, so it isn't like I can drive it to a remote location and do it. Does anyone have any suggestions, as I am needing this car as a daily driver since my other vehicle was recently totaled out due to a darn teenage son.
Thanks in advance.
So I have been doing some work on my 04 ml500 and it has not had an inspection in almost 2 years. I have driven it it some highway and city, but still have no readiness on the cat and evap. I have looked at some of the available readiness drive cycles, but they are not realistically obtainable in my area, especially needing to be done from a cold start, so it isn't like I can drive it to a remote location and do it. Does anyone have any suggestions, as I am needing this car as a daily driver since my other vehicle was recently totaled out due to a darn teenage son.
Thanks in advance.
The following users liked this post:
Misti I (05-02-2021)
