Help! ML350 Won't Start
11-18-2011, 02:05 PM
#1
Newbie
Thread Starter
Join Date: Nov 2011
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ML350
Help! ML350 Won't Start
Hello, I just attempted starting my car, and it won't start.
When I turn the key for ignition, engine attempts to start, but it is "stuck" cranking and does not start.
I did leave the car for about 2 weeks, so thought it may be the battery issue, but I am unsure since I've never encountered this kind of behavior before.
Dashboard Lights that are on:
Triangle with exclamation mark
Triangle with car
LIM (ABS)
SRS
Check Engine
UPDATE
Had it jumped using a friend's car.
It did start after a few "coughs" with all the dashlight warnings going away except for the Check Engine light. Check Engine light blinked a few times before it became permanent.
I was able to feel that something was wrong with the engine (weird vibrations).
I let the car run a few min, then turned it off, to see if the check engine light would persist if I restarted it.
Strangely, problem went away when car was restarted - no check engine lights or the weird vibrations.
When I turn the key for ignition, engine attempts to start, but it is "stuck" cranking and does not start.
I did leave the car for about 2 weeks, so thought it may be the battery issue, but I am unsure since I've never encountered this kind of behavior before.
Dashboard Lights that are on:
Triangle with exclamation mark
Triangle with car
LIM (ABS)
SRS
Check Engine
UPDATE
Had it jumped using a friend's car.
It did start after a few "coughs" with all the dashlight warnings going away except for the Check Engine light. Check Engine light blinked a few times before it became permanent.
I was able to feel that something was wrong with the engine (weird vibrations).
I let the car run a few min, then turned it off, to see if the check engine light would persist if I restarted it.
Strangely, problem went away when car was restarted - no check engine lights or the weird vibrations.
Last edited by kjkimx; 11-18-2011 at 04:59 PM. Reason: Update
11-18-2011, 06:06 PM
#2
Super Member
Search around the forum. Have heard of this a few times before and it usually points to the famous cam (or crankshaft) position sensor issue.
