When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Major,
I replace the motor with a new one and after a few days the same problem and code recurred. This time I removed the motor and the small shaft looks like the attached picture. There's a cord wrapped around the shaft. There's a steel core wrapped with some wooly material, may be to stop dust getting in. the cord has been dislodged as seen on the picture. I can't make it stay wrapped. I don't know whether that's how it's supposed to be.
Any thoughts please.
Thanks,
P.S. Both motors work perfectly fine when not installed and powered just by connecting the power plug under the seat! So may be the wrap on the shaft gets jammed in and stop any movement.
It's the old one. I have a hard time finding a replacement. Any way I can find out the part number? I've looked at a few exploded view but non had this part showing.
MB sells the entire carriage!
Thanks
Yes I bought a new motor. But the same problem reemerged after a few days. I'm sure problem is with this short shaft that I can't find a replacement for.
Yes I bought a new motor. But the same problem reemerged after a few days. I'm sure problem is with this short shaft that I can't find a replacement for.
That shaft is part of the motor and cannot be bought separately. Your problem is where that shaft is inserted in.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
