Maj. Dundee

I recommended that you pull those fuses on Mar. 16, post #15, which was 18 days ago. How am I to know what what fuses you are referring to.

You are supposed to find the post and click on QUOTE and then make your statement.

Why has it taken 18 days to pull two fuses?

Did you receive the Autel scanner?

richrom2

I did pull the fuses then but didnt really have time to diagnose the issue due to my job occupation and the limited time I have and always being on duty. I just had several days off and removed the each fuse and left them out while i did my errands. I found that when I pulled the #34 fuse, the issue stopped and hasnt done the auto lock and unlocking at all for a couple days. I'm still waiting on the scanner to come in. Should be coming in any day now.

Maj. Dundee

So is the issue solved?

richrom2

So I take the issue would be the front driver door?

Maj. Dundee

Fuse 34 is for the driver's door and fuse #26 is for the passenger door.

What door is working properly?

richrom2

I pulled fuse #26 and kept it out for. Day and the problem continued. I put it back in and removed fuse #34. It's been off for a couple days now and the issue hasnt happened. I just haven't had any function with the driver door as far as locking it and putting down the window. All fu actions on the rest of the doors and gate do work other than the driver door.

Maj. Dundee

Why can't you just answer the question..................What door is working properly?

richrom2

I DID..... just trying to be as specific as possible for you. With fuse #34 out. ALL DOORS WITH THE EXCEPTION OF THE DRIVER FRONT DOOR ARE WORKING PROPERLY. The automatic locking and unlocking has stopped.

Maj. Dundee

`Let's wait until your scanner arrives and do a full scan on the entire car.

richrom2

Ok. The scanner was delivered. I plugged it in and received this code.

richrom2

Right now I'm doing an auto scan on the vehicle

richrom2

richrom2

Maj. Dundee

The RED codes in the blue sections are unreadable.

richrom2

9014

Maj. Dundee

Rich, you posted 3 photos. What are the code numbers for them?

richrom2

The first one is for the intake runner (2006). The other 2 are 9014. You still able to read it? I know you said you couldn't read the code because it's in red.

Maj. Dundee

The code for the locking indicates that the door lock switch, S85/5 is sticking in the locked position.

With the key out of the ign., remove the door lock switch, only follow procedure #6 in the PDF.