2007 ml 350 auto dimming rear view
03-26-2019, 08:19 PM
#1
Newbie
Thread Starter
Join Date: Mar 2019
Location: Westchester,N.Y.
Posts: 6
Received 0 Likes
on
0 Posts
s300 ml 320 ml350
2007 ml 350 auto dimming rear view
Hi I'm trying to convert my ML's rear view mirror to auto dim , I purchased a new one, #A 164 810 24 17 , it has a flat connector that has 6 wires in it, original mirror has 4 . Trying to see if I can convert ! any help would be appreciated.
Last edited by jef d; 03-27-2019 at 02:10 PM.
03-27-2019, 03:50 AM
#2
MBWorld Fanatic!
What are the colors of the five wires?
Does you truck have a rain sensor?
What is your full vin# ?
Post a photo of the connector.
Does you truck have a rain sensor?
What is your full vin# ?
Post a photo of the connector.
Last edited by Maj. Dundee; 03-27-2019 at 03:57 AM.
03-27-2019, 08:16 PM
#3
Newbie
Thread Starter
Join Date: Mar 2019
Location: Westchester,N.Y.
Posts: 6
Received 0 Likes
on
0 Posts
s300 ml 320 ml350
Hi, My vin is 4JGBB86E37A236310
yes I do , have a rain sensor
the original mirror has homelink
and the original mirror has a white 4 wire flat plug/ colors are:1 white 2 orange/brown 3 green 4 black
the new mirror with auto dimming and no homelink ,has a 6 wire black connector colors are 1white 2brown 3orange 4yellow 5green 6 purple
Sorry the pics are so big
Last edited by jef d; 03-27-2019 at 08:34 PM.
The following users liked this post:
jef d (03-28-2019)
Trending Topics
03-29-2019, 10:35 AM
#8
MBWorld Fanatic!
I believe I have found the problem.
The mirror you bought, 164 810 24 17, is the wrong application for your vehicle. Look at the option codes as it does not have code 494 which is USA Version, as opposed to the other part number with code 494.
As a matter of fact I think you can only install the inside mirror if you have dimming outside mirrors.
11-26-2023, 05:10 AM
#12
Installed rear view mirror help
I just installed one on my car same thing didn't have to option for it so i went to a junkyard and pulled one out same year and model I installed it but doesn't work does it need to be programmed also maybe some re wiring?
