Help with 2011 ML350 Bluetec... codes
#26
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Actually I don't have a sensor code. I have a 111500 code that the DPF didn't regenerate. Why it didn't is the question. I also have a 5025 code for CAN communication but this could be related to front speed sensors needing some maintenance (cleaning, adjusting?). Or -- could it code be related to one of the exhaust sensors? Yes, It would seem that a sensible first step would be to replace the DPS, being only $25. Thanks
#27
Junior Member
Joined: Apr 2018
Posts: 21
Likes: 0
From: Sylacauga, Alabama, USA
2011 ML350 Bluetec, 4JGBB2FB6BA733038
Maj. Dundee, thanks for the reply. Yes, I thought I was using a 229.51 oil until just now when I just checked the Mercedes chart for approved oils. I typically use Pentosin 5w40. The 5w30 is approved but the 5w40 is not. I order from FCP Euro and they confirm it is an approved oil. I'll change to the 5w30 or use the Mobil1 5w30 (which I typically use in the winter). Thanks
#28
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
#29
Junior Member
Joined: Apr 2018
Posts: 21
Likes: 0
From: Sylacauga, Alabama, USA
2011 ML350 Bluetec, 4JGBB2FB6BA733038
#30
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
The following users liked this post:
frederickcarney (09-11-2020)
#31
Code 106100 - OM642 Blutec R350 w251
Same issue here with the only code 106100. Car 57k miles with no prior emission problems since 42k miles purchased. Oil changes around 5k miles with MB oil.
Anyone who was able to fix code 106100 that can provide some guidance would be greatly appreciate it.
Anyone who was able to fix code 106100 that can provide some guidance would be greatly appreciate it.