Renntech or Supersprint exhaust for ML500/ML550
#26
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
2013 ML500 (own), 2014 Audi A7, 2014 Audi A5 sportback 1.8TFSI 2013 Lexus GS350, 2014 Lexus RX350
As for the ml63 convesion, I'm surprised no one has ever done it on the forum. Maybe cuz I'm the youngest owner here who loves the ml63 but can't afford it
#28
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
2013 ML500 (own), 2014 Audi A7, 2014 Audi A5 sportback 1.8TFSI 2013 Lexus GS350, 2014 Lexus RX350
#30
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
2013 ML500 (own), 2014 Audi A7, 2014 Audi A5 sportback 1.8TFSI 2013 Lexus GS350, 2014 Lexus RX350
#32
please send video
#33
Hi guys, Roberto of Supersprint Italy here.
Sorry for the intrusion.
I took the libery to make a quick comparison photoshop:
As you can see the centre and the height of the Supersprint 120x80 tailpipes and the Brabus (Ø80mm?) is very close if not identical. This means that the exit pipes of the Supersprint system would arrive in the middle of the brabus bumper valance, then a set of 1->2 tips should be fitted. As we haven't got the exact measures of this bumper we cannot provide a plug&play set. We could provide the pre-assembled tips and y-pipes but they'll need some adjustment and final welding.
The Supersprint centre pipes 849413 (plus 721453 adaptors) and rear F1 Race muffler will sound very similar to this:
http://www.supersprint.com/en/doc-s-...st_system.aspx
Sorry for the intrusion.
I took the libery to make a quick comparison photoshop:
As you can see the centre and the height of the Supersprint 120x80 tailpipes and the Brabus (Ø80mm?) is very close if not identical. This means that the exit pipes of the Supersprint system would arrive in the middle of the brabus bumper valance, then a set of 1->2 tips should be fitted. As we haven't got the exact measures of this bumper we cannot provide a plug&play set. We could provide the pre-assembled tips and y-pipes but they'll need some adjustment and final welding.
The Supersprint centre pipes 849413 (plus 721453 adaptors) and rear F1 Race muffler will sound very similar to this:
http://www.supersprint.com/en/doc-s-...st_system.aspx
#34
Member
Straight Pipe mufflers instead of spending thousands on Renntech or Performance M
I went to a muffler shop that specializes in mandrel bending stainless exhaust pipe so that it keeps its diameter and does not kink for better flow..
I had them remove only the rear mufflers on my 2012 CLS550 biturbo and straight pipe them.
The sound was amazing, better than Renntech, better than AMG with no drone. Unlike a renntech or AMG muffler, the straight pipes send the sound directly out.
I have a video of the sound if anyone wants to hear it.
Do yourself a favor and go to a quality muffler shop that does mandrel bends and replace your mufflers with straight pipe. Cost is $300 Save $3000 or more. Better Sound
And my 0 to 60 improved 0.2 seconds from 3.8 to 3.6 (Renntech Tune) because of the better flow from the straight pipes over the stock mufflers
I had them remove only the rear mufflers on my 2012 CLS550 biturbo and straight pipe them.
The sound was amazing, better than Renntech, better than AMG with no drone. Unlike a renntech or AMG muffler, the straight pipes send the sound directly out.
I have a video of the sound if anyone wants to hear it.
Do yourself a favor and go to a quality muffler shop that does mandrel bends and replace your mufflers with straight pipe. Cost is $300 Save $3000 or more. Better Sound
And my 0 to 60 improved 0.2 seconds from 3.8 to 3.6 (Renntech Tune) because of the better flow from the straight pipes over the stock mufflers