Adjust headlights.
Thread Starter
MBWorld Fanatic!
Joined: Apr 2016
Posts: 1,124
Likes: 205
From: NW
2018 GLC 4MATIC
Adjust headlights.
Hi All,
Can someone provide guidelines how to adjust headlights? Need to get them down a little.
I remember reading some posts here and it was stated there is a small hole for screwdriver.
Cant find anything.
Please help.
Can someone provide guidelines how to adjust headlights? Need to get them down a little.
I remember reading some posts here and it was stated there is a small hole for screwdriver.
Cant find anything.
Please help.
MBWorld Fanatic!
Joined: May 2017
Posts: 1,234
Likes: 155
From: Montreal/Cape Coral FL
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
Found it within 3 seconds. Above the drivers side headlamp, close to the warning sticker about the 25000 volt shock danger, there's a hole in the rad support. If you shine a flashlight down that hole, you should see a whitish Allen (hex) bolt head. I'm guessing that with a +/- 12" 1/4" extension or two and an Allen head bit you should be able to adjust it easily enough
MBWorld Fanatic!
Joined: May 2017
Posts: 1,234
Likes: 155
From: Montreal/Cape Coral FL
2012 X6 35i Sport, 2013 ML 350 BT, 2019 4Runner TRD Pro, 2020 CRV-AWD
I checked and....uhhhhh, no idea whatsoever...
And it's weird that a Torx fits better. Just checked again and I swear that's an Allen head screw
And it's weird that a Torx fits better. Just checked again and I swear that's an Allen head screw
Last edited by peter2772000; Oct 26, 2017 at 04:42 AM.
Thread Starter
MBWorld Fanatic!
Joined: Apr 2016
Posts: 1,124
Likes: 205
From: NW
2018 GLC 4MATIC
Originally Posted by peter2772000
I checked and....uhhhhh, no idea whatsoever...
And it's weird that a Torx fits better. Just checked again and I swear that's an Allen head scrfew
And it's weird that a Torx fits better. Just checked again and I swear that's an Allen head scrfew
