Active and Adaptive headlight functions don't work
The very abbreviated version is, the dealer I bought my ML63 from left a fender liner access panel out so a lot of things got really wet. The entire assembly had a ton of water in it and destroyed the LED control module. After replacing the control module things started working, sorta. The only functions that don't work are the adaptive functions and high beams. At start up, the left one will move and do it's thing, the right one won't move at all. My scanner says the actuator is bad in the headlight. So what do I do? I replace the headlight. Same problem, no change. I've also changed the xenon ballast and the bulb will light up sometimes and not other times (so less functionality than now).
To summarize, replace EVERYTHING to do with the headlight, no active lighting or high beams. What am I missing? What should I be checking? Does that LED module or xenon ballast need programming of some sort? I don't know if it's potentially related or not, but one of my parking sensors says it has low voltage on it. It's not the sensor so it must be in wiring.