Regen indicator light
Thread Starter
Newbie
Joined: Mar 2023
Posts: 3
Likes: 0
2013 ml350, 2016 2500 Sprinter 2.1l
Regen indicator light
Hi everyone, new to the site. My question is, has anyone tried to tap in to the signal to activate the regen cycle and install a light to let you know when a regen is happening. This would prevent a shut down during a cycle and tell to keep driving until it's finished. Or can someone provide schematics so I can see if it's possible. Thanks
MBWorld Fanatic!
Joined: Jan 2013
Posts: 3,745
Likes: 811
From: The Great White North
W204 C63 Coupe, W166 ML350 BlueTEC, 928GT, Taycan GTS Sport Turismo, C5 Z06 & IS300 race cars
It's actually pretty easy to tell... when you come to a stop and the revs drop to idle, it almost feels like the car is "misfiring". You can furthermore confirm it if you come out of the car with the engine still running and can feel a lot of heat coming from the exhaust on the left rear side and can also hear the "ticking" of the DPF and exhaust metal expanding as a result of the extreme heat. It's hard to miss.
Junior Member
Joined: May 2020
Posts: 50
Likes: 20
From: Florida
GL350, Audi A3 TDI, VW Beetle TDI
compignition, Recommend that you search and review the thread "Scanners for DPF Regeneration". See my posts #33 and #35. Scangauge does not provide you a light when the regen is occurring--it does something better--you can anticipate when a regen will occur and plan your driving accordingly. Mike
Thread Starter
Newbie
Joined: Mar 2023
Posts: 3
Likes: 0
2013 ml350, 2016 2500 Sprinter 2.1l
It's actually pretty easy to tell... when you come to a stop and the revs drop to idle, it almost feels like the car is "misfiring". You can furthermore confirm it if you come out of the car with the engine still running and can feel a lot of heat coming from the exhaust on the left rear side and can also hear the "ticking" of the DPF and exhaust metal expanding as a result of the extreme heat. It's hard to miss.
