problem with Malone Stage 1
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 313
Likes: 2
From: Toronto, Canada
2005 E320 CDI (sold); 2007 R320 CDI (sold); 2008 ML320 CDI; 2014 ML350 Bluetec
problem with Malone Stage 1
I did Malone stage 1 with Buzzlen pipe. Before I performed change, the car was in perfect shape (just recently Mercedes fixed all emission components as part of recall). After installation, i have problem with diesel consumption (16-17 lit per 100 km), The power is present but ,,,I opened ticket with Malone but in meanwhile i am wondering if somebody could share what sensors should be disconnected. As per Malone, the following sensors should be removed
DPF pressure sensor
EGR sensor unplug
Intake Flap motor
DO NOT disconnect exhaust manifold backpressure sensor.
How about other sensors
1. Do I need disconnect rear NoX sensors (on bottom, passenger side)
2. Adblue sensor ?
Could you please give me some hint about next step ? As I mentioned, the car was in perfect shape before tune ..
A.
DPF pressure sensor
EGR sensor unplug
Intake Flap motor
DO NOT disconnect exhaust manifold backpressure sensor.
How about other sensors
1. Do I need disconnect rear NoX sensors (on bottom, passenger side)
2. Adblue sensor ?
Could you please give me some hint about next step ? As I mentioned, the car was in perfect shape before tune ..
A.
