Cannot connect to ESP/ABS module after factory update
Thread Starter
Junior Member
Joined: Jul 2016
Posts: 42
Likes: 1
2008 C63 AMG
RESOLVED: Cannot connect to ESP/ABS module after factory update
Hello,
Ever since MB performed an update to the ESP/ABS module, they have not been able to connect again to the ESP/ABS module to diagnose "abs/esp inoperative", "cruise control inoperative", "run flat inoperative", speedometer not working.
Neither MB, nor my local MB tech using a snap-on diagnostic tool can connect to the module to diagnose the above issues.
Last year I replaced both rear tone rings and this year replaced the brake light switch, but I imagine replacing parts isn't going to help if the ESP module isn't connecting. If I reset module by disconnecting the battery, it works for a few miles then the lights come back on.
Help!
Thanks!
Ever since MB performed an update to the ESP/ABS module, they have not been able to connect again to the ESP/ABS module to diagnose "abs/esp inoperative", "cruise control inoperative", "run flat inoperative", speedometer not working.
Neither MB, nor my local MB tech using a snap-on diagnostic tool can connect to the module to diagnose the above issues.
Last year I replaced both rear tone rings and this year replaced the brake light switch, but I imagine replacing parts isn't going to help if the ESP module isn't connecting. If I reset module by disconnecting the battery, it works for a few miles then the lights come back on.
Help!
Thanks!
Last edited by CanadianC63; Jul 25, 2020 at 08:48 PM. Reason: Resolved
