2004 C-class DTM
Thread Starter
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,465
Likes: 0
From: SF Bay Area
2002 C230 K
2004 C-class DTM
Here's the first shot released of the new C-class race car for 2004.
It tested for the first time last weekend. The drivers like it, say it sets up better than the old CLK. Be interesting to see how it does now that Audi is participating with a full works effort.
It tested for the first time last weekend. The drivers like it, say it sets up better than the old CLK. Be interesting to see how it does now that Audi is participating with a full works effort.
Senior Member
Joined: Dec 2001
Posts: 290
Likes: 0
From: Ashland, Ohio
ex-C32
Looks like they have company:
http://www.audiworld.com/news/04/011804/
With top names behind the wheel of the C-class Audi is going to have it's work cut out for it in searching for drivers.
And Cadillac CTS enters SpeedChannel series too.
Norm
http://www.audiworld.com/news/04/011804/
With top names behind the wheel of the C-class Audi is going to have it's work cut out for it in searching for drivers.
And Cadillac CTS enters SpeedChannel series too.
Norm
MBWorld Fanatic!
Joined: Nov 2001
Posts: 3,744
Likes: 1
Originally posted by Jim's500E
Its the same V-8 motor that all the makes use though...right?
Its the same V-8 motor that all the makes use though...right?
Thread Starter
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,465
Likes: 0
From: SF Bay Area
2002 C230 K
Originally posted by Lynn
No, each company builds its own engines. The specs for the engines are fairly rigid. They must be 4 liter 90 degree V8's weighing at least 165 kilograms. The cylinder bore spacing must be 102 mm. The camshafts must be chain driven.
No, each company builds its own engines. The specs for the engines are fairly rigid. They must be 4 liter 90 degree V8's weighing at least 165 kilograms. The cylinder bore spacing must be 102 mm. The camshafts must be chain driven.
