broken window.
10-10-2006, 06:08 PM
#1
Member
Thread Starter
Join Date: Apr 2005
Location: San DIego
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
c240
broken window.
i already post this, however i was wondering how do i fix a borken glass on the passenger side for a 2003 c240. Any help would be very much appreciated(webistes_). i just bought a glass window for $220 and installion would be around $300. i just want to save some money from this incident. thanks .
10-10-2006, 08:41 PM
#2
MBWorld Fanatic!
Join Date: Nov 2001
Location: Philadelphia area
Posts: 4,260
Likes: 0
Received 4 Likes
on
3 Posts
2010 ML550, 2010 E350 4M, 1966 Corvette Convt C2
If you never did it before and don't know how let a professional do it. The risk of doing more damage and even breaking your new glass is great. It could cost you lots more than they want for installation.
10-11-2006, 09:53 AM
#3
MBWorld Fanatic!
Join Date: Mar 2006
Location: Louisiana
Posts: 3,254
Likes: 0
Received 12 Likes
on
12 Posts
03 E500 and Corvette
I have not repaired the glass in a MB but in my other cars it is not too difficult to do this in the doors. BUT I would recommend you get the Manual from MB for your car on how to disassemble the door. Jim
10-11-2006, 12:35 PM
#4
MBWorld Fanatic!
There are several good posts on how to get the door panel off....the door pulls break a lot. Make sure you get the upgraded window attach hardware if its not already on your car. You can tell by looking at the two attach points. If they are black/round rubber you're OK, if its white plastic change it.
