Valentine 1 installation
10-08-2002 | 12:39 AM
#2
MBWorld Fanatic!
Joined: Jun 2002
Posts: 1,249
Likes: 17
From: Chicagoland, IL
09 C63
Skip the tech. Save the $$.
Use fuse #7 in trunk fuse panel. To run wire, pop off door sills and slip back the carpeting. The hardest part is to get the wire from trunk area into the cabin - I used a wire fishtape (fiberglass not metal). I pushed it through the innards until it came out where I needed it to.
Hopefully this helps. The hardest part is the #7 fuse!
Search for hardwire or valentine on W203 forum.
P
Use fuse #7 in trunk fuse panel. To run wire, pop off door sills and slip back the carpeting. The hardest part is to get the wire from trunk area into the cabin - I used a wire fishtape (fiberglass not metal). I pushed it through the innards until it came out where I needed it to.
Hopefully this helps. The hardest part is the #7 fuse!
Search for hardwire or valentine on W203 forum.
P
10-08-2002 | 03:10 AM
#3
Thread Starter
Member
Joined: Sep 2002
Posts: 163
Likes: 0
From: Diamond Bar, CA.
2005 B6 S4
Originally posted by peet
Skip the tech. Save the $$.
Use fuse #7 in trunk fuse panel. To run wire, pop off door sills and slip back the carpeting. The hardest part is to get the wire from trunk area into the cabin - I used a wire fishtape (fiberglass not metal). I pushed it through the innards until it came out where I needed it to.
Hopefully this helps. The hardest part is the #7 fuse!
Search for hardwire or valentine on W203 forum.
P
Skip the tech. Save the $$.
Use fuse #7 in trunk fuse panel. To run wire, pop off door sills and slip back the carpeting. The hardest part is to get the wire from trunk area into the cabin - I used a wire fishtape (fiberglass not metal). I pushed it through the innards until it came out where I needed it to.
Hopefully this helps. The hardest part is the #7 fuse!
Search for hardwire or valentine on W203 forum.
P
Anyone know of a MB tech in So. Cal. region that can help me out?
Thanks
Peter
10-08-2002 | 03:07 PM
#4
Senior Member
Joined: Jan 2002
Posts: 379
Likes: 0
From: Portland, Oregon
Hey
I think that EvoSport can do it for you. They are in the L.A. area and are supposed to be very good! There are some EvoSport reps on this board (outpalik & Mach430) Like I said I am pretty sure they could hardwire it for you!
-AmgBoy
-AmgBoy
