VSS help
#1
Newbie
Thread Starter
Join Date: Feb 2002
Location: Miami, FL and Rio de Janeiro
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Mercedes-Benz A190 (W168) and E220CDI (W210)
VSS help
Could someone help us to connect the VSS wire of a Rostra cruise control in the AKS 160 A-Class (W168) ECU?
We are using magnets in the left front shaft with a pick-up coil that work fine in straight line but in curves, the speed changes.
The on-board ECU should have this output, maybe in the dashboard speedometer PC board.
This signal can be a sinewave or squarewave TTL (5v) or CMOS (12v) signal.
BTW, every American or Japanese made cars have this info published.
Thanks,
Sergio
We are using magnets in the left front shaft with a pick-up coil that work fine in straight line but in curves, the speed changes.
The on-board ECU should have this output, maybe in the dashboard speedometer PC board.
This signal can be a sinewave or squarewave TTL (5v) or CMOS (12v) signal.
BTW, every American or Japanese made cars have this info published.
Thanks,
Sergio
Last edited by svc; 02-13-2002 at 10:21 AM.