Dual mass flywheel
06-29-2012, 08:20 PM
#1
Newbie
Thread Starter
Join Date: Jun 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
c 320
Dual mass flywheel
I'm replacing the clutch in a 05 c 320. My question is how loose should this dual mass flywheel be. I don't think this should be as loose
as it is. There is forward and back rotational movement, but pulling the top to bottom in and out really ,really loose. If anyone that can help it would be great.
Thanks
as it is. There is forward and back rotational movement, but pulling the top to bottom in and out really ,really loose. If anyone that can help it would be great.
Thanks
