In over my head (help)
#1
Member
Thread Starter
In over my head (help)
Hello everyone. I am writing to ask for some guidance. The story goes like this..
Someone lowered the ride hight on my 2011 E550 4Matic using vediamo. A few months later, I wanted to raise the car up a little. I used a launch x431 to try and complete the task. Because of the vediamo, I cannot keep the values in range unless I jack up the car like an SUV. So I got within the values and saved (car currently sitting very high)
I just purchased a Star C5 and it came today. I eagerly unboxed everything and ran outside to try the suspension again. I used xentry but same thing. To be in the values the car was too high. So now I need guidance/help.
I have to use vediamo I guess but I have no clue on how to tackle this. Any help would be greatly appreciated. Let me know if you could help in anyway.
Thanks
Someone lowered the ride hight on my 2011 E550 4Matic using vediamo. A few months later, I wanted to raise the car up a little. I used a launch x431 to try and complete the task. Because of the vediamo, I cannot keep the values in range unless I jack up the car like an SUV. So I got within the values and saved (car currently sitting very high)
I just purchased a Star C5 and it came today. I eagerly unboxed everything and ran outside to try the suspension again. I used xentry but same thing. To be in the values the car was too high. So now I need guidance/help.
I have to use vediamo I guess but I have no clue on how to tackle this. Any help would be greatly appreciated. Let me know if you could help in anyway.
Thanks
#3
Member
Thread Starter
#4
The following users liked this post:
Mr. Toad (06-26-2020)