ABC Flush with Accumulator Replacement
Thread Starter
Senior Member
Joined: Feb 2004
Posts: 283
Likes: 69
From: Baltimore, MD
93 Mustang GT, 94 Corvette ZR1, 2004 CL55 AMG, 2012 MP4-12c
ABC Flush with Accumulator Replacement
Found this thread here: https://mbworld.org/forums/cl-class-...y-job-yes.html
And this tool here: https://agatools.com/products/aga-mb-abc-ft
Want to replace the accumulators and other parts in this kit here: https://www.fcpeuro.com/products/mer...-2203270115kit
Will flushing with the above mentioned technique and tool completely flush our any air that is introduced into the system from replacing the parts in the above kit?
And this tool here: https://agatools.com/products/aga-mb-abc-ft
Want to replace the accumulators and other parts in this kit here: https://www.fcpeuro.com/products/mer...-2203270115kit
Will flushing with the above mentioned technique and tool completely flush our any air that is introduced into the system from replacing the parts in the above kit?
Super Member
Joined: Feb 2007
Posts: 613
Likes: 294
From: Republic of Texas
W203 W212 W211 R53MCS
Replace accumulators and use DAS/XEntry to perform the rodeo function. This function cycles all corners of the car up and down, thus bleeding system of any air. When replacing accumulators, don't forget to release the pressure for that circuit. This system is under extreme pressure.
