Starter relay location
Thread Starter
Newbie
Joined: Jan 2007
Posts: 11
Likes: 0
2011 GL350bluetec
Starter relay location
Hello every one
2011 GL350 diesel
Does any one know where is the starter relay located?
was trying to google it yesterday and can't seem to find it
Thanks in advance!
2011 GL350 diesel
Does any one know where is the starter relay located?
was trying to google it yesterday and can't seem to find it
Thanks in advance!
Thread Starter
Newbie
Joined: Jan 2007
Posts: 11
Likes: 0
2011 GL350bluetec
look here-----Mercedes-Benz Electronic Spare Parts Catalogue Online
My vehicle won't start and i need to locate the starter relay IN the vehicle to test it to see if it's faulty or my starter not working.
And then go from there to see if it's something else but i just wanted to start with the relay.
Ignition was malfunctioning a few months ago and i took the ignition box apart and soldered 3 pins and she was running fine till the day before yesterday
MBWorld Fanatic!
Joined: Dec 2012
Posts: 2,473
Likes: 439
From: Ball Ground, GA (N of Atlanta)
2003 S500 2007 GL450
Lots of possible reasons for the starter not working - neutral safety switch, power supply, starter relay, starter solenoid, starter, faulty cable, faulty connection, etc., etc.
It's easy enough to hook up a test light at the starter and see if there is power coming from the starter relay.
It's easy enough to hook up a test light at the starter and see if there is power coming from the starter relay.
Thread Starter
Newbie
Joined: Jan 2007
Posts: 11
Likes: 0
2011 GL350bluetec
Lots of possible reasons for the starter not working - neutral safety switch, power supply, starter relay, starter solenoid, starter, faulty cable, faulty connection, etc., etc.
It's easy enough to hook up a test light at the starter and see if there is power coming from the starter relay.
It's easy enough to hook up a test light at the starter and see if there is power coming from the starter relay.
So any chance You know where it is?
a few months ago i had it randomly not starting and i took apart the ignition lock and soldered those pins.
after that she was running fine till last week.
PS sorry just realized i posted it in the wrong section though i don't think relay location is different
moving to X164
Last edited by alexinvancouver; Jan 27, 2022 at 03:49 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
