Dozza07

Hi All,

Just finished replacing my PCV valve but with oily fingers i accidently dropped the screw that holds the PCV valve in. Cant seem to find where it went . I will have another look tommorow but if no success does anyone know what type of screw bolt that is? it looked like a M6 x 16MM screw.

Any suggestions?

octoroll

M6x22 Part #0009907011

Dozza07

Thanks for that. I managed to find a M6 x 20mm bolt at the local hardware store that did the trick .

Reiven

Hi Dozza,

Did you have to remove the intake manifold to fit in the new pcv?

Any tips on wriggling the pcv in.

Having troubles with mine as the metal bar under the intake opening is causing me grieve.

Thanks!

Dozza07

Apologies for the very late reply. Wriggling the pcv in was a pain in the you know where. I had have my belly on the engine/supercharger and do it by feel. I also had to loosen the hose clamp so i can rotate the hose as it was getting in the way then once the pcv was in, tighten the hose clamp/.