When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Feel free can any one suggest solutions to fix the following fault code for Mercedes E-280, Model 2008, all these appears after I had a minor accident on the left side fender and I had replaced also air bag on right side open, it was replaced as well.
1) fault Code: 9183
The resistance in the ignition circuit containing component R12/1 driver emergency tensioning retractor (ETR/GUS) ignition squib, is too high
2) fault code: 91C3
The resistaresistance in the ignition circuit containing component R12/6 left rear emergency tensioning retractor ignition squib is too high.
3) fault code: 930E
Synchronisation of the DTC memory cannot be ensured
4) fault code: 9062
No CAN message is received from the control module Steering Column Module
5) fault Code: 9069
No CAN message is received from the control module Instrument Cluster
6) fault code: 9060
No CAN message is received from the control module Anti-lock Brake system
7) fault code: 9061
No CAN message is received from the control module Motor Electronics
8) fault code: 9063
No CAN message is received from the control module Electronic Ignition Switch
9) fault code: 9202
Control module A1 (instrument cluster or N73 Electronic Ignition Switch, control module are replaced
10) fault code: 910A
Invalid drive authorization data
I hope to here from you guys, kindly share your experiences on the above.
thank you
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
