Speed Innovation Software
#1
Almost a Member!
Thread Starter
Join Date: Dec 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2002 CLK430
Speed Innovation Software
Any feed back on Speed Innovation software? I read a guy name Jessie owns it.
I received good info from Powerchip, Speedtunningusa.
Evosport software is the same as Powerchip.
Kleemann is out of the action. Thanks!
I received good info from Powerchip, Speedtunningusa.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#4
Almost a Member!
Thread Starter
Join Date: Dec 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2002 CLK430
#5
Almost a Member!
Thread Starter
Join Date: Dec 2007
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
2002 CLK430
I received an e-mail from Jim. He told me HPS fired Speed Innovation and the software was stolen from Power chip. He says the software goes back to the orginal settings. So you lose on the power from the chip. Are you having any problems like this?
Do you have a current before/after dyno you could post.
I'm not trying to go after you, just want to make sure I pick the right guy.
Do you have a current before/after dyno you could post.
I'm not trying to go after you, just want to make sure I pick the right guy.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Trending Topics
#8
MBworld Guru
I have it on my car...been well over a year now with no problems
I gained 6 whp and 16 lb ft. to the wheels...not bad for a NA 4 cylinder!
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06424.jpg)
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06426.jpg)
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06425.jpg)
sorry they're dark!
top is hp
bottom is tq
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06424.jpg)
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06426.jpg)
![](http://img.photobucket.com/albums/v373/trefiveincognito/Bugatti/DSC06425.jpg)
sorry they're dark!
top is hp
bottom is tq
Last edited by OCKlasse; 04-21-2008 at 01:07 PM.
#12
I own a cls 6.3 and had Status Auto Design who subcontracted with Jesse
prior to him opening up this Speed Inovation shop in Van Nuys. Jesse REALLY
REAPPED ME OFF. Not allowing me to watch the tuning.
Which should have given me a good reason to walk away. I then took my car to Vadim to have him install a Quaiffe LSD, and I mentioned that the ECU had been done by Jesse. Well the guys at Powerchip (Jeremy Fleming) took out the ecu and found that the timing program wall all wrong,....
They re-tuned the ecu, installed it and the car runs Great. They charged me a nominal amount, since I could not prove his work, I did not proceed with legal action.
AGAIN. In my opinion Jesse is a con artist. He was working out of the trunk of his white cls 6.3 with a painted black top.
P.S. Vadim installed the Quaffe LSD on my CLS and whow what a difference.
Vadim worksmanship was second to none. His price was fair, and he spared not expenses in istalling new seals, and using to of the lines in fluids.
prior to him opening up this Speed Inovation shop in Van Nuys. Jesse REALLY
REAPPED ME OFF. Not allowing me to watch the tuning.
Which should have given me a good reason to walk away. I then took my car to Vadim to have him install a Quaiffe LSD, and I mentioned that the ECU had been done by Jesse. Well the guys at Powerchip (Jeremy Fleming) took out the ecu and found that the timing program wall all wrong,....
They re-tuned the ecu, installed it and the car runs Great. They charged me a nominal amount, since I could not prove his work, I did not proceed with legal action.
AGAIN. In my opinion Jesse is a con artist. He was working out of the trunk of his white cls 6.3 with a painted black top.
P.S. Vadim installed the Quaffe LSD on my CLS and whow what a difference.
Vadim worksmanship was second to none. His price was fair, and he spared not expenses in istalling new seals, and using to of the lines in fluids.
#13
MBWorld Fanatic!
Join Date: Dec 2005
Location: So Cal
Posts: 2,347
Likes: 0
Received 1 Like
on
1 Post
2006 Weistec 3.0L SC'd C55, 2006 MaxPsi PT6466 Turbo'd M3, 2019 Maserati GTS , 2020Alfa Quadrifoglio
I own a cls 6.3 and had Status Auto Design who subcontracted with Jesse
prior to him opening up this Speed Inovation shop in Van Nuys. Jesse REALLY
REAPPED ME OFF. Not allowing me to watch the tuning.
Which should have given me a good reason to walk away. I then took my car to Vadim to have him install a Quaiffe LSD, and I mentioned that the ECU had been done by Jesse. Well the guys at Powerchip (Jeremy Fleming) took out the ecu and found that the timing program wall all wrong,....
They re-tuned the ecu, installed it and the car runs Great. They charged me a nominal amount, since I could not prove his work, I did not proceed with legal action.
AGAIN. In my opinion Jesse is a con artist. He was working out of the trunk of his white cls 6.3 with a painted black top.
P.S. Vadim installed the Quaffe LSD on my CLS and whow what a difference.
Vadim worksmanship was second to none. His price was fair, and he spared not expenses in istalling new seals, and using to of the lines in fluids.
prior to him opening up this Speed Inovation shop in Van Nuys. Jesse REALLY
REAPPED ME OFF. Not allowing me to watch the tuning.
Which should have given me a good reason to walk away. I then took my car to Vadim to have him install a Quaiffe LSD, and I mentioned that the ECU had been done by Jesse. Well the guys at Powerchip (Jeremy Fleming) took out the ecu and found that the timing program wall all wrong,....
They re-tuned the ecu, installed it and the car runs Great. They charged me a nominal amount, since I could not prove his work, I did not proceed with legal action.
AGAIN. In my opinion Jesse is a con artist. He was working out of the trunk of his white cls 6.3 with a painted black top.
P.S. Vadim installed the Quaffe LSD on my CLS and whow what a difference.
Vadim worksmanship was second to none. His price was fair, and he spared not expenses in istalling new seals, and using to of the lines in fluids.