This is what it looks like today!
#1
Thread Starter
MBWorld Fanatic!
Joined: Aug 2002
Posts: 1,104
Likes: 0
From: Rocklin, California
2011 GL450
This is what it looks like today!
Kleemann in Colorado received my car yesterday (Because the transport driver was being difficult, Brandon took the time to go to Denver and pick the car up (Thank you!)).
You wouldn't believe how much data they have collected so far. Multiple Dyno’s Reports, Diagnostic reports, Vehicle status report, Photo’s like the one below and more.
We have been in constant contact. I have learned so much from them it's unbelievable.
Here’s a picture of the engine with the intake manifold removed.
Thought some of you might want to see what it looks like!
Tim
\
Even more progress just about an hour later!
You wouldn't believe how much data they have collected so far. Multiple Dyno’s Reports, Diagnostic reports, Vehicle status report, Photo’s like the one below and more.
We have been in constant contact. I have learned so much from them it's unbelievable.
Here’s a picture of the engine with the intake manifold removed.
Thought some of you might want to see what it looks like!
Tim
\
Even more progress just about an hour later!
Last edited by Timster; 02-12-2003 at 08:50 PM.
Trending Topics
#12
MBWorld Fanatic!
Joined: Dec 2001
Posts: 5,531
Likes: 198
From: Washington D.C.
2016 GLE63s / 2016 E63s / 2002 E55
Timster, your live in CA - why did you ship your car all the way to CO instead of going to an authorized dealer in your state like?:
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
#13
Originally posted by E55 KEV
Timster, your live in CA - why did you ship your car all the way to CO instead of going to an authorized dealer in your state like?:
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
Timster, your live in CA - why did you ship your car all the way to CO instead of going to an authorized dealer in your state like?:
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
#15
Thread Starter
MBWorld Fanatic!
Joined: Aug 2002
Posts: 1,104
Likes: 0
From: Rocklin, California
2011 GL450
Originally posted by E55 KEV
Timster, your live in CA - why did you ship your car all the way to CO instead of going to an authorized dealer in your state like?:
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
Timster, your live in CA - why did you ship your car all the way to CO instead of going to an authorized dealer in your state like?:
Conversion Techniques Inc. - Oakland, CA
EvoSport, Inc. - Huntington Beach, CA
DC Performance - Los Angeles, CA
BergWerks - Van Nuys, CA
Canepa Design - Santa Cruz, CA 95062
The reason I had the car shipped to Colorado is that Brandon (Kleemann USA Inc) was willing to verify that the car was put back to original before he started the project.
Not many people would even want to look at a car that had somebody else’s aftermarket product on and had it removed because it didn’t work correctly.
Brandon is taking the time to verify and correct any potential problems prior to installing the Kleemann Super Charger System.
Tim
#16
Re: This is what it looks like today!
Originally posted by Timster
Kleemann in Colorado received my car yesterday (Because the transport driver was being difficult, Brandon took the time to go to Denver and pick the car up (Thank you!)).
You wouldn't believe how much data they have collected so far. Multiple Dyno’s Reports, Diagnostic reports, Vehicle status report, Photo’s like the one below and more.
We have been in constant contact. I have learned so much from them it's unbelievable.
Here’s a picture of the engine with the intake manifold removed.
Thought some of you might want to see what it looks like!
Tim
\
Even more progress just about an hour later!
Kleemann in Colorado received my car yesterday (Because the transport driver was being difficult, Brandon took the time to go to Denver and pick the car up (Thank you!)).
You wouldn't believe how much data they have collected so far. Multiple Dyno’s Reports, Diagnostic reports, Vehicle status report, Photo’s like the one below and more.
We have been in constant contact. I have learned so much from them it's unbelievable.
Here’s a picture of the engine with the intake manifold removed.
Thought some of you might want to see what it looks like!
Tim
\
Even more progress just about an hour later!
now who is that dude in th esecond pic?! hehe
#17
Thread Starter
MBWorld Fanatic!
Joined: Aug 2002
Posts: 1,104
Likes: 0
From: Rocklin, California
2011 GL450
Re: Re: This is what it looks like today!
Originally posted by tango
now who is that dude in the second pic?! hehe
now who is that dude in the second pic?! hehe
Tim
#19
MBWorld Fanatic!
Joined: Dec 2001
Posts: 5,531
Likes: 198
From: Washington D.C.
2016 GLE63s / 2016 E63s / 2002 E55
Originally posted by JamE55
Just curious why did Kleemann take out the whole bumper kit and wheels for the installation on this kit?? Does the kit require some installation underneath the car or what??
Just curious why did Kleemann take out the whole bumper kit and wheels for the installation on this kit?? Does the kit require some installation underneath the car or what??
#20
Super Moderator
Joined: Nov 2001
Posts: 6,340
Likes: 20
From: Southern California, USA
2003 CL55 AMG
Originally posted by JamE55
Just curious why did Kleemann take out the whole bumper kit and wheels for the installation on this kit?? Does the kit require some installation underneath the car or what??
Just curious why did Kleemann take out the whole bumper kit and wheels for the installation on this kit?? Does the kit require some installation underneath the car or what??
#21
Originally posted by awiner
The bumper removal is necessary to install the after cooler radiator in the front end.
The bumper removal is necessary to install the after cooler radiator in the front end.