Running a 180mm crank and 83mm sc pulley
Thread Starter
Junior Member
Joined: Jul 2012
Posts: 20
Likes: 0
CL55 AMG
Running a 180mm crank and 83mm sc pulley
Hello
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
Super Member
Joined: Aug 2013
Posts: 847
Likes: 31
From: Australia
2004 W211 E55 AMG >>gone but not forgotten > W123 280E > W124 E280 > W126 380SE
Hello
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
MBWorld Fanatic!
Joined: Apr 2015
Posts: 1,421
Likes: 160
From: SoCal
2024 c300 , 2006 E55, 2005 e320, 2007 gl450, 2025 glc300, 2025 e450
Hello
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
I'm running 180 mm crank and 83 mm sc pulley on an sl55 along with tune,550cc Bosch injectors,
k&n,headers, x-pipe, no cats, 3" pipe, and an 82mm tb.
I have a large johnson intercooler pump and an aftermarket fabtech heat exchanger.
I haven't gotten it out yet or put it on dyno.
Question 1: is the cooling that I have enough
Question 2: what kind of hp should be expected
Thank you guys
