FS: 2x W126 oil cooler + braided S/S hoses
01-14-2013, 04:06 PM
#1
Newbie
Thread Starter
Join Date: Jan 2013
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
944
FS: 2x W126 oil cooler + braided S/S hoses
I am putting up for sale my old oil cooler setup, from the W126 Mercedes turbodiesel. I started using this setup in 2009 on my Porsche 944 as the stock water bath oil cooler wasn't doing the job in the temperatures of inland southern California. It has worked brilliantly for me, even in over 110*F ambient temperatures.
The only reason I removed this from my car is due to the unique front structure of my car not having sufficient space for this cooler and an intercooler as well. I very much wanted to keep this cooler on the car as it worked so well but there just wasn't any room to spare, so I decided to let someone else benefit. I have since switched to Setrab units.
The hoses included with the cooler are -10 size stainless braided hoses, approximately 2 ft and 4ft in length. This is enough to fit on a 944 body. The longer hose should be adaptable to the Mercedes as a replacement for the original hoses/hard line, and the shorter hose, perhaps with an extension, could work well too.
On one end of the hoses are the OEM "gooseneck" fittings that match the cooler, and on the other end are 24mm metric fittings.
I will include with the cooler and hoses a second, identical cooler as a spare. I would like to receive $180 shipped for the complete package as that is what I have invested. I am open to offers.
The only reason I removed this from my car is due to the unique front structure of my car not having sufficient space for this cooler and an intercooler as well. I very much wanted to keep this cooler on the car as it worked so well but there just wasn't any room to spare, so I decided to let someone else benefit. I have since switched to Setrab units.
The hoses included with the cooler are -10 size stainless braided hoses, approximately 2 ft and 4ft in length. This is enough to fit on a 944 body. The longer hose should be adaptable to the Mercedes as a replacement for the original hoses/hard line, and the shorter hose, perhaps with an extension, could work well too.
On one end of the hoses are the OEM "gooseneck" fittings that match the cooler, and on the other end are 24mm metric fittings.
I will include with the cooler and hoses a second, identical cooler as a spare. I would like to receive $180 shipped for the complete package as that is what I have invested. I am open to offers.
merc w 126 oil coolers....
