S500: 18 Magnets for crankshaft position sensor (CKP) not recognized
01-15-2018, 01:55 AM
#1
Newbie
Thread Starter
Join Date: Jan 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
s500 w140
S500: 18 Magnets for crankshaft position sensor (CKP) not recognized
Hi,
I have an s500 1995. The car worked properly until I hade it put in the garage for 3 years without anyone driving it. After 3 years I changed the battery (since it was discharged) and got it working I started seeing some issues: car hesitation, misfiring and problem starting the car when the car is warm. I built a small circuit to read out the error codes, and one of the codes I get is this:
I have an s500 1995. The car worked properly until I hade it put in the garage for 3 years without anyone driving it. After 3 years I changed the battery (since it was discharged) and got it working I started seeing some issues: car hesitation, misfiring and problem starting the car when the car is warm. I built a small circuit to read out the error codes, and one of the codes I get is this:
On pin 17 - Code 18 Magnets for crankshaft position sensor (CKP) not recognized
Anyone that has had similar issues? What is the first step in fixing this? Do I need to replace the whole flywheel or can some kind of cleaning solve this issue? Any help is appreciated!
02-14-2018, 07:47 AM
#3
MBWorld Fanatic!
wiring harness OK? Has the car run long enough to dry everything out?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
