S600 RennTech Dyno'ed @ 742rwtq!!!
Here's the dynograph:

The RWHP came in at 504.
The baseline stock run is green at 505rwtq & 440rwhp.
The 91 pump gas file is red; it came in at 615rwtq & 483rwhp.
We calculated with a 26.5% loss factor for auto trans and rwd that the flywheel TQ is 937 and the HP is 638.
The car tries to break the rear tires loose if you stomp the gas anywhere lower than 50mph.
It ran a 12.3 bone stock on street tires. I'm taking it to the strip this weekend with some new drag radials. With an extra 140rwtq and 56rwhp, I'm expecting to run in mid 11's. We'll see.




Here's the dynograph:

The RWHP came in at 504.
The baseline stock run is green at 505rwtq & 440rwhp.
The 91 pump gas file is red; it came in at 615rwtq & 483rwhp.
We calculated with a 26.5% loss factor for auto trans and rwd that the flywheel TQ is 937 and the HP is 638.
The car tries to break the rear tires loose if you stomp the gas anywhere lower than 50mph.
It ran a 12.3 bone stock on street tires. I'm taking it to the strip this weekend with some new drag radials. With an extra 140rwtq and 56rwhp, I'm expecting to run in mid 11's. We'll see.
I was told by both Kleemann and Renntech to figure 20% to obtain the rough( some losses are fixed) reading at the crank.
Trending Topics
The Best of Mercedes & AMG
Increadible dyno. How much did the performance mods cost to get to your 11.43@122? I am contemplating getting a used S600.
Thanks
The Renntech software runs $6400.




