2001 S500 headlight upgrade install question
01-18-2007, 09:23 PM
#28
Senior Member
Mark, If you just bought a hid lamp itself with self leveling, that would not solve it.. Your car has to be equipped with the self leveling hardware as well I believe... The easy thing to do is forget about self levleing and get an oem projector headlight (halogen) and do a retro fit and just get them aimed right. Or buy something like Glatzos has. those are the two best reasonable options period. unless you want to spend a fortune.
OK, where can I get oem projector headlights (halogen)?
I dont even want HID I just want the new clear look but OEM so they wont suck like the ones sold on eBay for $300.00 dollars?
01-18-2007, 09:53 PM
#29
MBWorld Fanatic!
Join Date: Jul 2005
Location: OC
Posts: 2,319
Likes: 0
Received 1 Like
on
1 Post
AMG E55, Stage 1, Strait Pipe from Primary Cats
The hardest part is getting the old lamps out, putting the new ones in is easy. be sure to remove the 2 - 8mm bolts on the top of your bumper located on the inside area of the the headlamps for wiggle room that you will need and just remove the 2 - 10mm bolts securing each lamp and carefully wiggle them out, steel like knobs stick out of the fender side of each lamp so each lamp needs to pulled towards the center when taking them out.
01-18-2007, 10:05 PM
#30
MBWorld Fanatic!
Join Date: Jul 2005
Location: OC
Posts: 2,319
Likes: 0
Received 1 Like
on
1 Post
AMG E55, Stage 1, Strait Pipe from Primary Cats
Bekkers sells quality OEM lamps + some aftermarket.
http://www.bekkers.com/Merchant2/mer..._Code=mhlights
I would rock Glatzos exact lamps if I were you.. They will be a lot better than you think.. You will have 3 times the light.. it will give you the look and light you are looking for. do not waste your time with halogen projectors unless you are gonna do a hid retrofit.. your reflector halogen lamps you have now are brighter than halogen projectors. True there are better lenses in OEM projectors but these aftermarket lamps for the price are perfect. Take advantage of a projector lamp with HID that has only one plug which is plug n play and you will be happy you did....now step up.
01-19-2007, 08:01 AM
#32
Newbie
Thread Starter
Join Date: Jan 2007
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
hey if any of you guys are interested, if this refund thing doesn't happen, cause the company in Hong Kong still hasnt replied to my emails...any interest in purchasing these headlights. they are still in the box the came over here in, have the original shrink wrap over the lenses..basically new in box condition. i paid $1000 which included a rediculous $100 shipping fee. anyhow, i'll let them go for $900 for the pair or shoot me an offer and maybe ill consider. just don't low ball me. REMEMBER....THIS IS FOR A NON-HID TO HID PROJECTOR RETROFIT. please read above comments and replies.
Thanks for everything guys,
George
Thanks for everything guys,
George
01-19-2007, 02:19 PM
#33
Senior Member
hey if any of you guys are interested, if this refund thing doesn't happen, cause the company in Hong Kong still hasnt replied to my emails...any interest in purchasing these headlights. they are still in the box the came over here in, have the original shrink wrap over the lenses..basically new in box condition. i paid $1000 which included a rediculous $100 shipping fee. anyhow, i'll let them go for $900 for the pair or shoot me an offer and maybe ill consider. just don't low ball me. REMEMBER....THIS IS FOR A NON-HID TO HID PROJECTOR RETROFIT. please read above comments and replies.
Thanks for everything guys,
George
Thanks for everything guys,
George
However, if these are the cheap projector lights that I can get on ebay for 300.00 and then retored, I wont be interested. If the light display was bad before the retor they will still be bad after the retor.
01-19-2007, 02:21 PM
#34
Senior Member
I almost got tricked into getting one of those i'm in the middle of doing my retro. also with that aftermarket headlight the "shield" that makes that distinct cut off of the hid light is pos it will cause glare like no other mother... and there is so much leakage of light. waiting for my parts right now i got the e46 projector and i'm trying to retro that into the headlight will post more pics when i get the chance.
I'm very intersted in hearing your results.
Please start a new dedicated thread on this when you get more informaiton.
Mark
03-14-2007, 11:53 PM
#35
Newbie
Join Date: Mar 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Need Help Please W/ updating to 2003 headlights
I have a 2001 S55 with the old headlights (HID stock) and am trying to install the new 2003 HID stock headlights, the factory ('01) wire harness has a round 4pin connector but the connectors on the new ('03) headlights have a rectangular 3pin connector. I just need to figure out the wiring for this.
Any help would be great!
Any help would be great!
03-14-2007, 11:53 PM
#36
Newbie
Join Date: Mar 2007
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Need Help Please W/ updating to 2003 headlights
I have a 2001 S55 with the old headlights (HID stock) and am trying to install the new 2003 HID stock headlights, the factory ('01) wire harness has a round 4pin connector but the connectors on the new ('03) headlights have a rectangular 3pin connector. I just need to figure out the wiring for this.
Any help would be great!
Any help would be great!
03-26-2007, 02:58 AM
#37
Member
Join Date: Aug 2005
Location: Nor Cal
Posts: 77
Likes: 0
Received 2 Likes
on
2 Posts
S500 W220 Sport w/ Black Lorinser LM5(Sold), CLS500 Designo Edition, Kleeman effect w/ Kleeman Exh
I have a 2001 S55 with the old headlights (HID stock) and am trying to install the new 2003 HID stock headlights, the factory ('01) wire harness has a round 4pin connector but the connectors on the new ('03) headlights have a rectangular 3pin connector. I just need to figure out the wiring for this.
Any help would be great!
Any help would be great!
04-24-2007, 12:33 PM
#38
Newbie
Join Date: Feb 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
2003 + headlight upgrade
I am also having problems with my headlights. I have a 2002 s500 with the older style headlights. I bought newer style headlights from ebay. they are aftermarket. But the problem is that no one can figure out how to install them. I am looking for someone on the east coast like near Georgia, thats where I live. Who can help me install these headlights. Can someone help me out?? thanks
04-27-2007, 07:56 AM
#39
Senior Member
I am also having problems with my headlights. I have a 2002 s500 with the older style headlights. I bought newer style headlights from ebay. they are aftermarket. But the problem is that no one can figure out how to install them. I am looking for someone on the east coast like near Georgia, thats where I live. Who can help me install these headlights. Can someone help me out?? thanks
If you bought the ones for 350.00 they are junk. Dont waste your time. Have you not read the threads on this?
01-29-2008, 08:15 PM
#41
Member
Old thread revival to see if anyone has the pin diagram for the autolevel.
Regarding the high beam, some say to ground the first wire closest to the middle of the headlight while some say ground 1st and 3rd wire???
Regarding the high beam, some say to ground the first wire closest to the middle of the headlight while some say ground 1st and 3rd wire???
07-01-2016, 07:23 PM
#42
Newbie
Join Date: Jul 2016
Location: Woodbridge
Posts: 3
Received 0 Likes
on
0 Posts
2000 W220 s430 (they just gave it to me!)
Revival Revival!!
Does anyone have access to The install of an auto leveling harness?
Trying to get three little wires home...
Take Care!!
Does anyone have access to The install of an auto leveling harness?
Trying to get three little wires home...
Take Care!!
The following users liked this post:
Trapper John (11-30-2017)
