!HELP Entry Position Do Not Drive HELP!
08-17-2019, 11:42 PM
#1
Newbie
Thread Starter
Join Date: Apr 2019
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2004 S500
!HELP Entry Position Do Not Drive HELP!
Hey I need help with this issue. I have 2004 M-B S500 4matic Im getting this message entry position do not drive. I have try to reset the column and the seat. The seat works and the steering column also works. Im getting DTC B1521-005 (Exterior mirror adjustment and heating : The mirror heater has short circuit or open.) B1328 component S59/1s1 (steering column adust switch high and low, forward) fault. Somebody please help!
08-18-2019, 02:09 PM
#2
MBWorld Fanatic!
Try resetting the seat and column. Using each switch in turn, use the same procedure, i.e., hold the switch to run the column all the way out, and hold the switch for three or four seconds. Repeat for every movement on the seat and the column, holding the switch in each position for three or fours seconds after movement stops.
