OCP- Overhead Control Panel faul
Thread Starter
Newbie
Joined: May 2023
Posts: 2
Likes: 0
W220 S350
OCP- Overhead Control Panel faul
Hi folks, have run a diagnostic on my late 2003 W220 S350 and I’m getting the following fault codes which I cant clear:
B10E2: Indirect obstruction sensor - The teach-in process has not yet been performed
B10E1: Indirect obstruction sensor - The reference values following the teach-in process are beyond the predefined limits.
I’ve tried to reset the electronics by opening/closing the sunroof, holding the switch after each for 10 seconds, to no avail.
Anybody got any idea what the issue is and how to resolve.
Ribman
B10E2: Indirect obstruction sensor - The teach-in process has not yet been performed
B10E1: Indirect obstruction sensor - The reference values following the teach-in process are beyond the predefined limits.
I’ve tried to reset the electronics by opening/closing the sunroof, holding the switch after each for 10 seconds, to no avail.
Anybody got any idea what the issue is and how to resolve.
Ribman
