When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there a TSB or anything for vibrating LED strips in the door panels? I just skimmed the thread and don't see anything. The problem seems to have been reported 100's to maybe 1000+ times online.
Konig is there an LI for Seats. I found LI91.10-P-053443 on another page said it covers 2007-2013. i get a cracking sound when someone is in the passenger seat. I have the ELW warranty hopefully it is covered under that.
Recall Campaign 2017030015 APR17 - 2006 through 2016 117, 164, 166, 190, 204, 205, 207, 211, 212, 218, 221, 222, 231, 253, and 463 vehicles that received a control module coding update while at dealer between December 3, 2016 and December 5, 2016 might not function as intended dealer will update the affected control modules.
Last edited by konigstiger; 04-24-2017 at 02:43 PM.
LI82.85-P-069468 MAR19 – 221, 216 with NTG3 COMAND shows wrong date, time on the analog clock and cannot be altered.,Reset the instrument cluster control unit using Xentry however, bulletin does make clear if reset is at cost, or goodwill remedy.
LI82.85-P-069468 MAR19 – 221, 216 with NTG3 COMAND shows wrong date, time on the analog clock and cannot be altered.,Reset the instrument cluster control unit using Xentry however, bulletin does make clear if reset is at cost, or goodwill remedy.
The disappointing part of that bulletin is the second page, which does not indicate a fix and I quote:
- Complaint resolved until next required time change!
- Customer does not have any navigation function restrictions! - The date cannot be changed!
It is unfortunately not a fix for the date issue. If one reads the logs of the navigation system, it fills up quickly with "EPOCH time is more than one week off."I feel if they really want to fix this for their customers, they will release a telematics update and fix the defective software.
Service Campaign 2019040001 APR19 – 2012-2014 117, 166, 172, 204, 207, 212, 216, 218, 221, 222, 231, 251, 463 ECU Malfunction Indicator Light displayed while no fault is present in the control unit, dealer will update ECU software. Approximately 210,440 vehicles are affected.
Service Campaign 2019040001 APR19 – 2012-2014 117, 166, 172, 204, 207, 212, 216, 218, 221, 222, 231, 251, 463 ECU Malfunction Indicator Light displayed while no fault is present in the control unit, dealer will update ECU software. Approximately 210,440 vehicles are affected.
Thank you for sharing this. It actually happened today on my W221 CEL was on and no error code. Is this update free? Can you check if my vin is on the list of affected vehicles?
LI35.30-P-058566 SEPT20 – 171,172,203,204,205,207,209,211,212,213,215,216,21 7,218,219,220,221,222,223,230,231,238,253,257, 164,166,167,292,293 single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end) noise is heard once in each instance when changing direction of travel. If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to cracking of the microweld between the wheel bearing inner race and the joint housing of the side shaft. The collar nut must always be replaced after being loosened. Coat contact surface of side shaft with wheel bearing with Molykote paint (MB part # 0009890152).
LI33.30-P-056665 SEPT20 – All Mercedes-Benz cars with front-wheel drive and 4x4 vehicles single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). The clunk is heard once when changing from forward to reverse (and vice versa). If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to micromovement in the connection between the wheel bearing inner race and the joint housing of the side shaft. The collar nut must always be replaced after being loosened and must be tightened to the specified torque. Coat contact surface of side shaft with wheel bearing with Molykote paint (MB part # 0009890152).
LI27.50-P-049281 SEPT20 – 722.9 transmission when changing gear range from P to D, harsh engagement may be noticeable, engagement sequences for N-D and N-R must be taught in again as follows (always remain in the gear ranges N/R/D for at least 5 sec): start the engine from cold, shift 5 times N-R, shift 5 times N-D -> warm up transmission to 40°C and while doing so, exceed a speed of 30 mph at least once. Shift 5 times N-R, shift 5 times N-D -> warm up transmission to 70°C and while doing so, exceed a speed of 30 mph at least once. Shift 5 times N-R, shift 5 times N-D.
LI01.40-P-057996 JUL/21 – 152,157, 278 engine up to vehicle production DEC2013 coolant leaking into the engine oil via the molded seal between the timing case and the cylinder crankcase, replace seal.
LI01.40-P-057996 JUL/21 – 152,157, 278 engine up to vehicle production DEC2013 coolant leaking into the engine oil via the molded seal between the timing case and the cylinder crankcase, replace seal.