Cool option to have.
Chris

Trending Topics
See Below -
Removing and fitting the coolbox
You can remove the coolbox for maintenance purposes or to fit the skibag more.
Screws
Flap
Plug
To remove: switch off the coolbox.
Disconnect plug
.
Unscrew both screws
.
Pull out the coolbox.
Close flap
.
To install: swing flap
to the side until it is locked in place by the magnets.
Insert the coolbox.
Tighten both screws
.
Connect plug
.
The Best of Mercedes & AMG
See Below -
Removing and fitting the coolbox
You can remove the coolbox for maintenance purposes or to fit the skibag more.
Screws
Flap
Plug
To remove: switch off the coolbox.
Disconnect plug
.
Unscrew both screws
.
Pull out the coolbox.
Close flap
.
To install: swing flap
to the side until it is locked in place by the magnets.
Insert the coolbox.
Tighten both screws
.
Connect plug
.http://www.detali.ru/cat/oem_mb2.asp...SGR=015&SGN=01
http://www.detali.ru/cat/oem_mb2.asp...SGR=015&SGN=01
The cooler just came off of my list of potential upgrades. I would have preferered a little Nespresso machine anyway.

Am a fanatic re: minimal extraneous clutter in my cars....hate noises of any clutter moving around during my (often) brisk driving....and don't want unsecured stuff becoming intra-car missles in any emergent deceleration.....


Am a fanatic re: minimal extraneous clutter in my cars....hate noises of any clutter moving around during my (often) brisk driving....and don't want unsecured stuff becoming intra-car missles in any emergent deceleration.....
Sounds like you cannot be from the US
I would be fine with no cup holders.308 for sure is available in Europe.

Am a fanatic re: minimal extraneous clutter in my cars....hate noises of any clutter moving around during my (often) brisk driving....and don't want unsecured stuff becoming intra-car missles in any emergent deceleration.....


In Portugal extras are more expensive.
For example, here in Portugal, we paid almost 6000€ for the RES.
Bu it does worth the money.
I have sourced a replacement fridge but i am trying to find the correct part number for the wiring harness and plug so i can replace them properly rather that just stripping the existing connector and hard wiring it in.
I think it is part number 220-540-5708 but just wondering if anyone can confirm.
Thanks in advance.
I have sourced a replacement fridge but i am trying to find the correct part number for the wiring harness and plug so i can replace them properly rather that just stripping the existing connector and hard wiring it in.
I think it is part number 220-540-5708 but just wondering if anyone can confirm.
Thanks in advance.




I did it myself in my 2008 S65. I would like the wood upgrade.
J

Yeah did realise it was the w211 forum, but thought it was kinda okay to piggy back this thread for a quick answer.
Of the w220 forums for the next question. Thanks folks.



