Question about the "Vehicle Level Control Switch" aka The Raise Button
I recently lowered my w221 with AAR Links. Seems like this Raise button will come in handy if I have a full load & need to raise the car up a bit.
Apparently, the vehicle returns to it's "normal" ride height if you exceed 75 mph, or maintain a speed between 50 mph & 75 mph.
Is there ANY way to disable that feature, so it remains raised until I decide to lower it, regardless of speed??
Hopefully somebody out there has the answer..
Sorry.. After reading my statement/question, I can see how it might be misunderstood. Ok.. Being that I lowered my ride with links, I now have a pretty low "normal" ride height. When I press the raise button, It increases about an inch or so higher. I'd like the car to remain at that height, even though I exceed 50 mph, etc.. I don't want the car to lower back to that lower height.For example, Lets say I fill my car with 4 of my fat A$$ buddies
. I'd hit my raise button, & hit the road
. If I hop on a highway, & the thing lowers, we got problems.... I'm hoping there's a mod out there, that'll prevent it from lowering on it's own & only returns to "normal" when I choose to hit that button again.
Last edited by ramos226; Aug 28, 2011 at 11:20 PM.
Trending Topics
As far as modding it to remain in a raised position, someone with more knowledge of the Airmatic system would need to chime in. Nice drop though, looks good
The Best of Mercedes & AMG





