AUX cable/connector part number
#1
Newbie
Thread Starter
Join Date: Sep 2012
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2007 Mercedes Benz S550 (W221)
AUX cable/connector part number
Does anyone know of the correct part number of the AUX cable/ wiring harness for a 2007 s550. I'm trying to find the cable that plugs in the rear of the command radio changer.
Thanks
Thanks
#3
Super Member
Does this need to be enabled with Star?
Is Aux video seperate from audio (enabling wise)does this work with NTG3 as well ?
Video input is this composite :Pal/Ntsc and audio-level line-level?
Is Aux video seperate from audio (enabling wise)does this work with NTG3 as well ?
Video input is this composite :Pal/Ntsc and audio-level line-level?
#4
MBWorld Fanatic!
Join Date: Dec 2006
Location: Europe
Posts: 6,383
Received 295 Likes
on
247 Posts
223.168 & 213.012 & 906.633 & 214.005
You would need version coding with Star to enable the AUX inputs. I cannot remember if it is a common parameter, if it was, it would make even more sense to retrofit both cables.
Audio is standard stereo line level input like on older models with an AUX input at the glove box (actually it might need a bit higher input than the standard levels) and video is a composite video interface, I believe it works with both NTSC and PAL.
Audio is standard stereo line level input like on older models with an AUX input at the glove box (actually it might need a bit higher input than the standard levels) and video is a composite video interface, I believe it works with both NTSC and PAL.
#5
Super Member
Wow ,excellent know-how. You must be a Mercedes-Benz top-of-the-line engineer(Sonder-Klasse),many thanks sir !
Last edited by marthyh; 10-19-2012 at 04:00 AM.