Where to buy quality extended bolts?
Thread Starter
Member
Joined: Jun 2006
Posts: 187
Likes: 1
Where to buy quality extended bolts?
Hi all,
My s550 4matic is getting new shoes 22" Vellano VSO.
The front wheels, I am not able to use the stock oem 40mm bolts. These bolts are too long. I replace them with 28mm ones.
The rear wheels, the oem bolts were also too long. After doing a research regarding genetic bolts, I'm ready to spend $$ for a better quality set due to safety reason. I have looked into Rad bolts but they are in coated in blk.
Please advice.
Ned
I ask for ENTENDED bolts because I'm thinking of adding spacers.
My s550 4matic is getting new shoes 22" Vellano VSO.
The front wheels, I am not able to use the stock oem 40mm bolts. These bolts are too long. I replace them with 28mm ones.
The rear wheels, the oem bolts were also too long. After doing a research regarding genetic bolts, I'm ready to spend $$ for a better quality set due to safety reason. I have looked into Rad bolts but they are in coated in blk.
Please advice.
Ned
I ask for ENTENDED bolts because I'm thinking of adding spacers.
Last edited by voml55amg; Apr 11, 2013 at 07:14 PM. Reason: Infor
Former Vendor of MBWorld
Joined: Jun 2012
Posts: 1,434
Likes: 21
2012 Mercedes SLS, 2014 Mercedes SLS Black Series, 2014 E63S, 2013 S550, 2012 ML63, 2013 C250
Hi all,
My s550 4matic is getting new shoes 22" Vellano VSO.
The front wheels, I am not able to use the stock oem 40mm bolts. These bolts are too long. I replace them with 28mm ones.
The rear wheels, the oem bolts were also too long. After doing a research regarding genetic bolts, I'm ready to spend $$ for a better quality set due to safety reason. I have looked into Rad bolts but they are in coated in blk.
Please advice.
Ned
I ask for ENTENDED bolts because I'm thinking of adding spacers.
My s550 4matic is getting new shoes 22" Vellano VSO.
The front wheels, I am not able to use the stock oem 40mm bolts. These bolts are too long. I replace them with 28mm ones.
The rear wheels, the oem bolts were also too long. After doing a research regarding genetic bolts, I'm ready to spend $$ for a better quality set due to safety reason. I have looked into Rad bolts but they are in coated in blk.
Please advice.
Ned
I ask for ENTENDED bolts because I'm thinking of adding spacers.
