Fault Code P9070 - Trunk motor
I tried to mechanically activate the latch while the trunk is open with same result, i.e., the latch will not engage within 30 sec of opening, but will engage normally after the 30 sec delay. The only exception to this phenomenon is when the trunk is opened using manual key. In that case, the latch engages upon closing without having to wait the 30 sec.
iCarsoft MB v.2.0 scanner pulled codes: P9070/M14/7 (trunk cl motor) and 902C/Is6 trunk switch
I could not find whether the P9070 code refers to the faulty hydraulic pump or the motor that closes the latch. Any ideas or suggestion would be appreciated. Very puzzling. Needless to say, I would prefer solution that would not involve a dealer and thousands of dollars in troubleshooting and parts. I checked the prices on the pump assembly and it runs around $700 new.
Thanks in advance for any assistance.
Regards,
Ivan
$277.09 new https://www.mbdirectparts.com/
$79 used http://www.icarpart.com/2007-2013-me...-actuator.html
Very helpful, as usual with all your posts. Keeping my fingers crossed that it is a simple part swap without needing to reprogram anything with STAR.
Much appreciate the quick reply.
Ivan


