When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a new steering wheel for my W216 CL63 AMG. The new steering wheel has different airbag connectors than the old one.
Old connectors/airbag are like this: Old airbag
The new airbag/connectors are like this:
New airbag New connectors
First question
Question: which is the best solution?
I think to cut the cable coming from the steering column and then use something like solder shrink connectors to solder the cables from the new airbag to the cables on the car. What do you think?
Or should I replace the connectors? Are there other ways to do it?
Second question
If I'll solder the cables, are the cables colours the same on the new airbag (new green goes with old green, new blue goes with old blue and so on)?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
