W222 rear pillows?
#1
Member
Thread Starter
W222 rear pillows?
Hi - I have the warmth and comfort on my 2016 and the movable rear seats. I had my dealer throw in pillows for the back, they ordered from germany, A 222 970 00 81 9H93.
thye have the 2 snaps at the top, and 1 snap at the bottom. I have not noticed a bottom snap on my headrest, and I couldn’t get the snaps to well, snap, on either side. Am I some kind of stupid, or might these be the wrong ones? (I can’t find different ones). I can upload photos of box, pillows or car
. Searching the part number brought up stuff in I guess German, no help.
i don’t want to force anything.
i found a post on Benzworld where someone with a w221 bought these and sewed Velcro to make work.
thanks.
thye have the 2 snaps at the top, and 1 snap at the bottom. I have not noticed a bottom snap on my headrest, and I couldn’t get the snaps to well, snap, on either side. Am I some kind of stupid, or might these be the wrong ones? (I can’t find different ones). I can upload photos of box, pillows or car
. Searching the part number brought up stuff in I guess German, no help.
i don’t want to force anything.
i found a post on Benzworld where someone with a w221 bought these and sewed Velcro to make work.
thanks.
#2
MBWorld Fanatic!
I am in the same boat. Got the two top snaps to snap but cannot figure out where the bottom one is supposed to snap to. Probably something obvious.
#3
Member
Thread Starter
Thanks. How did you get the top two to snap, a lot of persuasion?
#5
Super Member
Mine has 2 snaps at the top rear of the headrest and one at the bottom center well back on the assembly. The only way to access the bottom snap is to motor the headrest to the fully forward position. This exposes the snap. I have the 2 seat plus center console rear seating package.
The following users liked this post:
Nice Ride (04-14-2018)
#6
Member
Thread Starter
Mine has 2 snaps at the top rear of the headrest and one at the bottom center well back on the assembly. The only way to access the bottom snap is to motor the headrest to the fully forward position. This exposes the snap. I have the 2 seat plus center console rear seating package.
i tried installing in cooler weather, maybe warmer will make the snaps more pliable? I’ll check for third snap again...thanks!
#7
Member
Thread Starter
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/86f8b343_98a6_464f_930a_35322053ff38_82eab144023c59b3b5848fb0bf58784b46030610.jpeg)
What the pillows came in, direct from Germany
![](https://cimg5.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/36ca1a31_c6c6_4f98_8f3d_c5a924480424_b543084a06e34bd2aa57083b2c8a452dbb59e5d6.jpeg)
Hard to tell, snap on seat is pointier, the ones on the pillow are the wider type
Okay, I just tried again. You gave me the fortitude to check, there is indeed a third snap under the protective cover on the bottom which restore my faith, which was quashed again. There is NO DOUBT these are the wrong snaps. I tried to capture a photo. I can send back, try to find/make an adapter, or use Velcro. I’ll try mb parts firs tot find correct cushions. Sigh.
Trending Topics
#8
Super Member
I have an S65 so most things are standard. The rear executive seating was an option, the video screens are then mandatory. Mine has the top level upgrade on the leather, it was a relatively inexpensive add for the S65. My pillows, including the one on the footrest were installed on delivery so I have never unsnapped them. Hard to believe MB uses 2 different sizes for the same product. It is possible the pillows on the two rear individual Executive seats I have are different than the pillows for the 3 seat rear seating package.
#9
Member
Thread Starter
I may try to source the correct snaps and drill out the ones on the pillows and replace. Just crazy to me. I think there are more expensive leather pillows versus these cloth pillows, no idea why different snap sizes. Hard to imagine why, and not clear which pillows for which.
i’ll also check with parts department.
these pillows were about $120 each, ought to fit...
i’ll also check with parts department.
these pillows were about $120 each, ought to fit...
#10
MBWorld Fanatic!
I may try to source the correct snaps and drill out the ones on the pillows and replace. Just crazy to me. I think there are more expensive leather pillows versus these cloth pillows, no idea why different snap sizes. Hard to imagine why, and not clear which pillows for which.
i’ll also check with parts department.
these pillows were about $120 each, ought to fit...
i’ll also check with parts department.
these pillows were about $120 each, ought to fit...
Took several weeks, $120- with 20% discount from dealer. Snaps were very stiff, but they fit. If they don't work, go back tot he dealer and have them replaced. You should not have to drill or add to them to get them to work. If Dealers are out of stock, ,Mercedes must custom make/order them for you..
#11
Member
Thread Starter
Thanks, shortened story is I had the dealership in Oregon order the pillows for me, I believe they come with a new car (at least per sales brochure and internet reviews). I think that well is dry, so unless I can swap a model “a” for a model b, I think it will be snap swapping, adding Velcro per these forums, or selling and buying $30 aftermarket pillows. Car isn’t horrible without these either, so I may be fixating on nonsense. Was just hoping I could buy 6 $1 or so adapters and be done.
#12
MBWorld Fanatic!
You can replace those snaps with the correct ones for about 5 bucks in parts. pretty easy to do with a drill, hammer and a punch.
#13
Member
Thread Starter
Thanks, I saw a video of a guy with a leather riding vest. I have no idea of the right size, I guess i'll try Michaels or joann's similar
#15
Member
Thread Starter
Thanks, I'd be interested to know which trim of leather you have and if the pillows have a box or model number on them
#16
Member
![](https://mbworld.org/forums/images/ranks/veteran_navy.png)
![](https://cimg8.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/6fcd1edd_5beb_4bd4_b671_b3f1fb9390b3_c85c31ac698c53fc1f5221ec443b77ac86ed4f71.jpeg)
![](https://cimg3.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/9d3743d3_9509_460f_aa54_97faed989ac6_d4b2ed5f96f1403ef7f20bb8ffbd16e5bb861bd6.jpeg)
Last edited by Matthayes3741; 04-15-2018 at 07:16 PM.
#17
Member
Thread Starter
![](https://cimg9.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/c09f8e5a_be00_4f6b_9e53_2a748f1ef866_565c3f545ebc0c4e7bbc7b17b829d61ae0734f1a.png)
![](https://cimg7.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/ecef9af0_1957_4c54_9b1f_9eb06415408f_23f83bd444bcef905580ef163ea8890b62fce67e.png)
Many thanks, those look like the exact snaps I have. Can you confirm the part on your headrests look like mine? To me it looks like i need a different kind of snap. I’m thinking I would need a male on the headrest like the one on the tarp, I have the “pointy” type on my headrest...
#18
MBWorld Fanatic!
#19
Member
Thread Starter
many thanks - was raining like crazy here - now the sun is out! i don't know if your exclusive will have different "bumps" on the back of your car headrests - i think i need the type shown in the tarp to work with the snaps on the pillows, so the easier solution (other than forgetting all this!) is to replace the snaps on the pillows which shouldn't be that tough - just requires the right snaps...
#20
MBWorld Fanatic!
iTrader: (3)
Join Date: Mar 2018
Location: Socal and Norcal
Posts: 1,410
Received 230 Likes
on
187 Posts
MY17 S63AMG - MBUSA Buyback. MY16 SL63 - Sold MY19 W213 E63s. 2020 W213 E63s Wagon
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/86f8b343_98a6_464f_930a_35322053ff38_82eab144023c59b3b5848fb0bf58784b46030610.jpeg)
What the pillows came in, direct from Germany
![](https://cimg5.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/36ca1a31_c6c6_4f98_8f3d_c5a924480424_b543084a06e34bd2aa57083b2c8a452dbb59e5d6.jpeg)
Hard to tell, snap on seat is pointier, the ones on the pillow are the wider type
Okay, I just tried again. You gave me the fortitude to check, there is indeed a third snap under the protective cover on the bottom which restore my faith, which was quashed again. There is NO DOUBT these are the wrong snaps. I tried to capture a photo. I can send back, try to find/make an adapter, or use Velcro. I’ll try mb parts firs tot find correct cushions. Sigh.
Last edited by S63AMG888; 04-17-2018 at 01:48 PM.
#21
Member
![](https://mbworld.org/forums/images/ranks/veteran_navy.png)
Attached are pictures of the snaps on the headrest of my 14. I have found the bottom snap is easier to attach when the headrest is all the way up and forward.
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/a9544744_beac_4416_94bc_f1c796aa78fc_603c7d37e6a57e6c732edb874c268a676895155d.jpeg)
![](https://cimg7.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1504/13716ad3_4d03_47c3_980c_ee84ca60e3fa_5da396202a3b490baaee35558b28686c674395ba.jpeg)
#22
Member
Thread Starter
Many thanks, your headrest has the snaps like the blue tarp I posted, on my headrest. My car is at dealer now, service advisor said to bring in the pillows. Not sure if they can be swapped. Many thanks!