Another seat bolster question
Thread Starter
Junior Member
Joined: Jul 2013
Posts: 20
Likes: 1
From: DFW
2015 CLS550, 2014 E350, 2014 GLK 350
Another seat bolster question
Whenever I get in the driver's seat the seat bolster gets set to 7. I set it to a lower value, say 2, it adjusts to the lower value no problem. Then I save my seat setting. When I get in the car again it is set back to 7. I am assuming this is not the way it is supposed to work? If I then select my saved setting it stays at 7, but can be readjusted again to 2 no problem. Gonna take it to the dealer to have it checked.
It is a 2014 S550 with designo seats.
It is a 2014 S550 with designo seats.
MBWorld Fanatic!
Joined: Mar 2018
Posts: 1,073
Likes: 596
From: Florida
18 AMG GTC and 22 F150 Limited. Past owner 16 Maybach, 17 Brabus Smartcar, 06 Ford E150, and 22 G70
Are you using the memory button to bring your seat back to the settings you set it at? IF so then you have to hold the button down till all the settings are reached. So with my car the lumber is usually the last thing to go to my setting after the seat has moved to whatever I set it at.
I dont know why you have to hold the button vs pushing it once and all the stuff goes to the place you want but its the German thing I guess.
I dont know why you have to hold the button vs pushing it once and all the stuff goes to the place you want but its the German thing I guess.
