Rear Window Replacement

I've purchased a replacement window from a local automotive recycling place but there is something different about this window than my original. This one has a small antenna at the top center. My original window didn't. Can the antenna be removed?
This is for a '07 C350 Sport.




The glass comes in 2 forms. I always thought the ones with the antenna hole are for the post-facelift 2005-2007 models, but maybe it's different between sedans and coupes. The antenna can of course be removed, but now there will be a hole in the glass. Why not just keep the antenna and use it if possible?
The reason I want to remove it is that I think it looks better without it. The reason I don't think it would be usable is because since my old window didn't have it, and I haven't lost any signal strength in the radio, I'm assuming my antenna is not located there. Not sure if this matters for antenna radio placement, but I have the harmon kardon/navigation/xm package.
One thing I'm also considering is to tint the window myself while it is loose... any thoughts?
https://mbworld.org/forums/c-class-w...ease-help.html
I am going to remove it.
Hood grille, back deck, etc. not working here to well and I am not drilling a hole...
Trending Topics
It is my understanding from the installer that the moulding that surrounds the glass is purely cosmetic.
The Best of Mercedes & AMG
Looks to be a completely glued in unit.
I was looking for confirmation it is okay to stuff a non OEM wire under that channel.
After SIRIUS antennas in the rear deck, hood and hood vent cutting out - I am going with a Infiniti/Nissan unit that looks "good" on the roof. I machined the curry FAKRA clip to fit...would have been just as easy to disassemble a blue Fakra and re-install...
I am not going OEM Mercedes and cutting a hole in the trunk, or roof as I have seen through the back interior light.
Thanks, I'll up load an image to round out the thread. I am not trying to steal your thread.
Here is what I mean. Cell flash makes my car look very dirty and dusty, yikes! Here is OEM INFINITI antenna, the window seam where I feel and see a little rubber flap. I HAVE tucked the SIRIUSXM antenna in this channel already. Also is a
picture of the curry Fakra end I machined to fit blue.
Last edited by BF_JC230; Aug 3, 2016 at 07:40 PM.




Is the radio antenna working and are the keys able to lock and unlock from a decent distance, like over 10 feet?
It is my understanding from the installer that the moulding that surrounds the glass is purely cosmetic.

I got this info from the right side door glass and I'm not sure what any of it means? Thanks, your help would be much appreciated.
PILKINGTON
E1 43R-001582
AS2 M3240 DOT682
40 ESG WD
ccc E000201
..... 4
Last edited by Allrevup; Jul 27, 2019 at 11:27 PM.
I got this info from the right side door glass and I'm not sure what any of it means? Thanks, your help would be much appreciated.
PILKINGTON
E1 43R-001582
AS2 M3240 DOT682
40 ESG WD
ccc E000201
..... 4

I don't think you meant too, but you are hijacking a thread. Just start a new thread on your own and ask your questions about your driver's window.



