When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had my trim pieces all molded and fitted with carbon fiber. It took quite a while to wait for the pieces, but the results speak for themself. This fits so much better in the Ash interior than the wood grain. Only issue is a few of the lower arm rest trim clips fell into the panel, and I can't get them out of there for the life of me. Does anyone know if these are available for purchase anywhere? I haven't check the dealer yet (I am not currently home with the car, I'm currently deployed) Any help would be appreciated
That looks much better. Ive always thought that brown wood was terrible for the E63. I have the black wood, which is still pretty slick looking, although not as nice as carbon of course.
Hey sorry guys, been traveling. Ocarbon did all the work. I'll let Matt give you a price since he used all my parts for molds.
You absolutely have to remove the door panels to put the trim on. They are attached by bolts. I would know, I changed it all out. The only pieces you don't have to is the lower trim pieces.
buy some trim removal tools, u wedge into the side pieces and pull them off, as u see in my pics above they are already out.
for the center surround, open the ask tray slide, then stick your fingers in the front of the surround and pull it up, and forward toward the ac surround ....dont be scared...just pull up and foward at an angle. Move the gear to get the surround out and undo the screws for the buttons.
cup holder surround it simply pulling gently around its perimeter
dash - start with opening the glove box, under the door latch is 2 small slides, open them and the top dash piece pops out,....undo some plugs with small screw driver...
next u have to remove the radio...partly alteast..2 screws on top, once u pull it out u can access the screws holding the ac surround in place, that pops off...then u have access to flip off the cover of the ash tray.
for the doors, i only had to pull off my lower strips....they just pop out.
the upper pieces probably require door card removal...probably easy, few screws and plugs, im sure youtube has videos...
u got this
so the original poster of this thread never said where he got his done did he?
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
Mercedes Teases Updated EQS With Steer-By-Wire and a Yoke
Slideshow: The 2027 update adds a fully digital steering system, revised styling, and potential charging upgrades as the company looks to revive interest in the luxury EV.
Slideshow: From problematic air suspensions to early dual-clutch transmission issues, these specific models and years stand out as the least dependable modern Mercedes vehicles.
