When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i would like to know if someone have any recommendition for wheel spacers on the c63s coupe? Brand and which sizes should i buy front wheels and the back. I'm aiming for a look that looks clean and the tire is just a lined with the body. Any suggestions?
2019 Audi SQ5, 2011 Toyota Tacoma TRD 4wd, 2016 Ford Focus se Hatchback
Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.
I've been shopping for spacers as well for my C43. I bought 15mm from ECS that are 66.6mm bore suggested for Audi/VW/Merc and they sent me the wrong Audi/VW bolts with the smaller ball.
Does anyone know if 66.6mm bore and the 66.56 mercedes bore are equivalent? I fit the spacers that I have to my car and they fit, but there is a TINY amount of give and I'm worried about vibrations.
I'm in contact with Supreme Power, waiting for a call back.
I've been shopping for spacers as well for my C43. I bought 15mm from ECS that are 66.6mm bore suggested for Audi/VW/Merc and they sent me the wrong Audi/VW bolts with the smaller ball.
Does anyone know if 66.6mm bore and the 66.56 mercedes bore are equivalent? I fit the spacers that I have to my car and they fit, but there is a TINY amount of give and I'm worried about vibrations.
I'm in contact with Supreme Power, waiting for a call back.
ECS did almost the same to me...
They claimed the spacers would fit and they had gap between the spacer and bore.
Yes, it will shake.
Go with Supreme or previous poster suggestion of 42DraftDesign.
2006 E55, 2012 Jeep SRT, 2008 G37s 6MT (The Mrs.), 2005 Explorer
Originally Posted by auditoamg
ECS did almost the same to me...
They claimed the spacers would fit and they had gap between the spacer and bore.
Yes, it will shake.
Go with Supreme or previous poster suggestion of 42DraftDesign.
We have done a lot of our spacers on AMG cars with success this year. We carry 15mm, 18mm, 20mm which we can run on these cars with their longer than usual hubs.
We are out of stock of our 15mm but do have H&R as a secondary option.
Our spacers sell for $125 shipped within the 48 contiguous United States.
H&R are a bit more as they do not include the extended bolts as part of their offering.
If anyone is looking for alternatives give me a shout direct on email (brian@supremepower.com) or my cell (626) 765-4013.
@Vic. What company did you use to lower your car? Coil overs or just springs? What’s the drop? Did it require additional camber correction hardware or just alignment after dropping it. Looks sic. I just got my 18’ C63 S in polar white with black forged rims.
Last edited by Jonathan Dunn; 05-31-2018 at 02:52 PM.
Reason: Typo
@Vic. What company did you use to lower your car? Coil overs or just springs? What’s the drop? Did it require additional camber correction hardware or just alignment after dropping it. Looks sic. I just got my 18’ C63 S in polar white with black forged rims.
I was lowered on KW HAS; I dont have the car anymore nor do I remember the actual drop amount but the front still had about 40mm left if I wanted to go further and the rear was pretty much maxed out. I didnt do any camber bolts but did do an alignment and didnt see much in tire wear as the true measurement for tire wear is toe (scrubbing) and that adjustment was more meaningful for me and my driving habits (turning).
Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.
Looks great. By chance did you ever move over to the 13mm spacers?
I am having aftermarket wheels put on this week so spacers will be coming off. If somebody is looking for H&R 15mm spacers with extended lugs make me an offer by PM. Fit is perfect and H&R quality.
Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.
I don't see they have any spacer listed on their website for MB. Do you happen to still have the part number for the spacer?
Hi Pizz, any more pics of the gts style wheels on brilliant blue? Are they Oem? Only ask as have BB and often think about swopping the 19/20 cross spokes for your wheels? They def need spacers. Im pondering 12mm all round as the pic of 15mm non lowered looks too wide in my eyes, but your rims look like 15mm would be perfect. Where are you getting them for £150?
Cheer Pizz. Planning on doing the black roof bit myself but thinking I will get it wrapped for ease.
If looking for spacers you should try cmw wheels. They list Bimmec 15mm all round for £125/ £130 with locking bolts ( bit cheaper if go silver, instead of black) and £8 postage. Ive used them loads from an old m3 forum I was on and really good. Also list a range of sizes and h&r. I’m thinking I may pull the trigger on 12mm h&r all round inc locking bolts for £150.
I used a local Mercedes approved body shop and they took the bumper off and stripped the grill, painted it and the roof for £550 so not bad really
as for the handles I’m having them removed and taken apart to have the Chrome dipped to black chrome
there is a company called cks performance that do black covers for them (plus lots of other good stuff)
the company you mentioned is the same company as the eBay link I sent, found out today that they don’t do black bolts long enough to suit the spacers so just trying to find 50mm bolts in black to suit