Wanted: Rear Bumper Flares/Splitters
#1
Member
Thread Starter
Wanted: Rear Bumper Flares/Splitters
I am trying to source those carbon fiber rear bumper flares that attach to the bottom left and right portions. They are $200 on eBay. I just missed someone selling theirs for half the price.
Anyone that has these for sale, head my way. Thanks.
Anyone that has these for sale, head my way. Thanks.
#2
Member
Thread Starter
Lil butt shot to pump you up. Getting CLS63 mufflers swapped out (or just tips, not sure). Got the CF "Ducktail" wing in today...Just waiting on the heat-gun, as that stock wing is a son of a gun to get off. That'll complete the rear, then sideskirts, lowering kit, some wide 19" wheels (secret), with nasty rolled fenders. Should be pretty. Might top it off with a roof rack for the winter mountain runs to Mt. High. Love that I can surf in the morning, and snowboard all before noon, and live in Los Angeles!
Last edited by SatelliteMan; 08-31-2017 at 01:16 AM.
#3
Member
http://www.carbon-addiction.com/index.php/product/mercedes-benz-w204-c63-revozport-style-carbon-rear-spats/
I ordered mine from Carbon Addiction. They were ~$200 as well.
I ordered mine from Carbon Addiction. They were ~$200 as well.
Last edited by Sick AF; 08-31-2017 at 10:45 AM.
#4
Super Member
Sick AF, some questions
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
http://www.ebay.com/itm/Carbon-Fiber...19.m1438.l2649
but I can never find any pictures showing what it looks like underneath
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
http://www.ebay.com/itm/Carbon-Fiber...19.m1438.l2649
but I can never find any pictures showing what it looks like underneath
#5
MBWorld Fanatic!
Join Date: Nov 2014
Location: Olathe, KS
Posts: 2,537
Received 399 Likes
on
277 Posts
'13 C63 AMG P31
Splitter Pics - Gives a good idea what it looks like underneath.
#6
Member
Thread Starter
Sick AF, some questions
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
http://www.ebay.com/itm/Carbon-Fiber...19.m1438.l2649
but I can never find any pictures showing what it looks like underneath
Did those splitters come with pre-drilled holes?
If so, do they line up correctly with the 2 torx bolts on the bolt of the bumper?
If not, are you drilling through the bumper cover to attach with the nuts and bolts you have in your picture?
Double sided tape used as well?
I was looking at these from ebay but I notice the design is a little bit different towards the tip where it comes closer to the muffler outlet
http://www.ebay.com/itm/Carbon-Fiber...19.m1438.l2649
but I can never find any pictures showing what it looks like underneath
I'm just going to use double sided tape on mine. Should hold just fine.
Trending Topics
#8
Member
Thread Starter
#9
MBWorld Fanatic!
Join Date: Jun 2011
Location: Silicon Valley, CA
Posts: 3,314
Received 170 Likes
on
145 Posts
C63 AMG, P30
A massive RW Carbon lip is like you said, $300, but a steering wheel that has like 9 inches of carbon fiber on it is like $2k all said and done with airbag, while a Alcantara / Leather wheel like mine can be had for literally half the price... Very strange, imho.
#10
Super Member
Did the rear bumper change at all from pre-fl to fl? I ask because I see 2 different styles of splitters. One that has a straight, angled side and the other that has small curve at the end. And when you look all over ebay, you can see that they offer the one that with the small curve as BOTH 2008-2011 only, AND 2012+ in different auctions.
small curve for 2008-2011 only
http://www.ebay.com/itm/Carbon-Fiber...9XOcSB&vxp=mtr
small curve 2012+
http://www.ebay.com/itm/3k-Carbon-Fi...53.m1438.l2649
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
straight angle for 2012+ only
http://www.cnautofans.com/products/c...-0194-567.html
I understand that ebay sellers will make the title say whatever they want but what do you guys think?
small curve for 2008-2011 only
http://www.ebay.com/itm/Carbon-Fiber...9XOcSB&vxp=mtr
small curve 2012+
http://www.ebay.com/itm/3k-Carbon-Fi...53.m1438.l2649
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
straight angle for 2012+ only
http://www.cnautofans.com/products/c...-0194-567.html
I understand that ebay sellers will make the title say whatever they want but what do you guys think?
#11
MBWorld Fanatic!
Join Date: Jun 2011
Location: Silicon Valley, CA
Posts: 3,314
Received 170 Likes
on
145 Posts
C63 AMG, P30
Did the rear bumper change at all from pre-fl to fl? I ask because I see 2 different styles of splitters. One that has a straight, angled side and the other that has small curve at the end. And when you look all over ebay, you can see that they offer the one that with the small curve as BOTH 2008-2011 only, AND 2012+ in different auctions.
small curve for 2008-2011 only
http://www.ebay.com/itm/Carbon-Fiber...9XOcSB&vxp=mtr
small curve 2012+
http://www.ebay.com/itm/3k-Carbon-Fi...53.m1438.l2649
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
straight angle for 2012+ only
http://www.cnautofans.com/products/c...-0194-567.html
I understand that ebay sellers will make the title say whatever they want but what do you guys think?
small curve for 2008-2011 only
http://www.ebay.com/itm/Carbon-Fiber...9XOcSB&vxp=mtr
small curve 2012+
http://www.ebay.com/itm/3k-Carbon-Fi...53.m1438.l2649
heres the one with the long straight angle. when looking at the pics from the bottom, u can almost see how the above pieces would fit all the way to the rear of the bumper, right before the muffler outlet and curve slightly around the diffuser
straight angle for 2012+ only
http://www.cnautofans.com/products/c...-0194-567.html
I understand that ebay sellers will make the title say whatever they want but what do you guys think?
#12
Member
Thread Starter
Yeah,and different style diffuser too. I work with a lot of composite mold houses for work, so I might bring them a few items to price out...this being one and my diffuser seat backs as another. Need to bring those price points down and more people can enjoy.
#13
Still available? Post is old but u never know