jd_hinks

Hey guys just finished a limited run of a few pcv adapter fittings. Made from billet 6061 with integral -8an male threads and Anodized red.

These fittings eliminate the need to splice your pcv valve to run inlet and return lines to a catch can set up!

$110 US +shipping. PM me if you want a set!

hachiroku

wished they were barbed fittings. how many do you have. i would be interested in a few weeks once pay day arrives.

Jasonoff

You can pretty much get a pack of four 8AN female to barb for 10 bucks anywhere.

GRP

Beat the Weistec tax.

I having been considering doing my own for some time with AN hose fittings.

PM sent

jd_hinks

You'll need adapters regardless. I saw that with an integral barb fitting it would increase cost and potential fitment issues. We used a 90 degree an fitting for the inlet line and a 45 degree an fitting for the return line to manifold. Pretty sure you can get barb 90's and 45's. This set up gives you the cleanest install

I started this project to contribute to the Fourm. So only available to Fourm members not offering them anywhere else. I'll throw a set aside for you if you want Let me know when ur ready....

quaalude

Nice work jd_hinks!! If I didn't source a Weistec catch can already, I would definitely buy these.

jd_hinks

Thanks man. Appreciate it!

GRP

Thanks JD - mine is going out in the next post.

I can now order my catch can and AN fittings out of China for a modestly priced first class catch can setup.

jd_hinks

Oops I meant to send that in PM....

hachiroku

hey @jd_hinks , sent you a PM! thanks for doing this for the community!

jd_hinks

Thanks! Pm sent.

deadlyvt

I already had one I made but this is way more pretty and the ability to replace pcv valves instead of the entire contraption is nice
can’t wait to get it 👍

jd_hinks

Still plenty of fittings left.. pm me for pricing! Thanks guys.

go team

These are super nice wish they were a different colour. If there’ll be another run I’ll keep an eye out for a brushed look.

jd_hinks

Thanks man. But defiantly will not be another run lol! This was a fun 1 time project but glad it's all done... all good bro!

Snowboard69s

I want a set

Jasonoff

Why do you care? You'll barely be able to see it lol.

Sincity

Nice!

BLKROKT

Lol about the color. Nobody will ever see it once installed.

Nice work JD

deadlyvt

I can attest to it being a nice piece definitely grab one if you are thinking of doing a catch can in the future

jd_hinks

Lol!!

jd_hinks

Thanks man! Appreciate the good word..hope all is well in ur neck of the woods?

go team

I’ll know the colour! Same with motor mounts! Loser comments don’t faze me
and OP those do look nice not dissing the quality!

This may work for some of you but not for me. Granted it’s well done. To each their own.

hachiroku

just received my adapters in the mail. the anodize and finish from machining is real high end. Thanks again JD!

deadlyvt

minor red fitting on the back of the intake manifold and under the air filters does make the engine compartment look like it was assembled with LEGO you are right! Or just overly dramatic ...